Page 3
When using electrical appliances, always follow basic safety precautions to reduce the risk of fire, electric shock and injury to persons, including the following: WARNING! To avoid the risk of electrical shock, fire or injury to persons, always unplug the appliance before moving, servicing or cleaning.
Page 7
Controls Handle Air outlet Air Intakes Water tank...
Page 11
- Take the air clean filter out of the polyethylene bag and attach it to the back filter. Active carbon - Set the air clean filter to the back cover, fitting it into the filter holder four catches in the cover. - Place the holder into the four catches in the cover, with the convex portions upward.
Page 12
When using the appliance for long periods, choose the 'Continuous Drainage' feature. Pull out the plug, remove the water tank and connect the drainage pipe to the drain hole, which is at the back of the unit. Connect the pipe to a sewer or other container for continuous drainage.
Page 13
1. Unplug the unit, coil the power cord and hang it at the back of the unit as shown. 2. Empty the tank and wipe it down with a cloth. Then, place it back into the appliance.
Page 14
1. Before cleaning and maintenance, switch off and unplug the appliance. 2. Using a soft and slightly damp cloth, carefully clean the surface of the appliance. You can use a mild soap solution to do this. 3. Ensure water or other liquids do not enter the inside of the appliance, as this can create a fire or electrical hazard.
Page 15
The specification may be subject to change without notice for purpose of improvement .
Need help?
Do you have a question about the 821-041V70 and is the answer not in the manual?
Questions and answers