2. FOR YOUR SAFETY
Your safety is the most important thing we concerned!
Please read this manual carefully and fully understand before operating your
dehumidifier.
2.1 OPERATIONAL PRECAUTIONS
WARNING- to reduce the risk of fire, electric shock or injury to persons or property:
● If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
● The appliance shall be disconnected from its power source during maintenance.
● Always operate the unit from a power source of equal voltage, frequency and rating as
indicated on the product identification plate.
● Always use a power outlet that is grounded.
● Unplug the power cord when cleaning or when not in use.
● Do not operate with wet hands. Prevent water from spilling onto the unit.
● Do not immerse or expose the unit to rain, moisture or any other liquid.
● Do not leave the unit running unattended. Do not tilt or turn over the unit.
● Do not unplug while the unit is operating.
● Do not unplug by pulling on the power cord.
● Do not use an extension cord or an adapter plug.
● Do not put objects on the unit.
● Do not climb or sit on the unit.
● Do not insert fingers or other objects into the air outlet.
● Do not touch the air inlet or the aluminum fins of the unit.
● Do not operate the unit if it is dropped, damaged or showing signs of product
malfunction.
● Do not clean the appliance with any chemicals.
● Ensure the unit is far away from fire, inflammable, or explosive objects.
● The unit shall be installed in accordance with national wiring regulations.
● Do not use means to accelerate the defrosting process or to clean, other than those
recommended by the manufacture.
● The appliance shall be stored in a room without continuously operation sources (for
example: open flames, an operating gas appliance or an operating electric heater).
● The appliance shall be stored so as to prevent mechanical damage from occurring.
● Do not piece or burn, even after use.
● Be aware that refrigerants may not contain an odour.
● Pipe-work shall be protected from physical damage and shall not be installed in an
unventilated space, if that space is smaller than 4m².
● Compliance with national gas regulations shall be observed.
● Keep any required ventilation openings clear of obstruction.
● The appliance shall be stored in a well-ventilated area where the room size corresponds
to the room area as specified for operation.
Any person who is involved with working on or breaking into a refrigerant circuit
should hold a current valid certificate from an industry-accredited assessment authority,
which authorizes their competence to handle refrigerants safely in accordance with an
industry, recognized assessment specification.
4
Need help?
Do you have a question about the 821-040V90 and is the answer not in the manual?
Questions and answers