Microtek ScanMaker 9830XL User Manual page 30

Scanning Positive/Negative Film
1. Place the positive or negative film,
2. Launch ScanWizard-One by double-clicking the program icon on the desktop.
3. Click on the "Scan Settings" button (
4. Specify the basic scan parameters as needed:
5. Click on the "Show Preview Window" and "Show Settings Window" tabs on
6. Click on the "Preview" button to perform an initial preview scan of the
7. Select the "Frame" tool (
8. If needed, create multiple scan jobs (scan frames) based on the number of
30 ScanMaker 9830XL User's Manual
along with the appropriate film
holder, face down on the scanner
glass surface. For detailed placement
instructions, refer to the "Positioning
Transparent Materials" section of the
manual.
The Microtek ScanWizard-One (AP) main interface appears on the screen.
NOTE: By default, you launch ScanWizard-One the first time, the "Scan &
Export" button is displayed on the interface. This button allows you to
bypass the manual export step, directly exporting and saving the scanned
images. If the "Scan" button instead of "Scan & Export" button is displayed
on the interface after startup, click the "Preferences" button (
"Export Images After Scanning" option in the dialog box that opens, and
then follow the steps below to proceed with scanning.
(TWAIN interface).
a) Select "Negative Film" for negative film, or "Positive Film" for slides and
transparencies in the Material drop-down list.
b) Select the color type of the image output in the Type drop-down list.
c) Specify the desired scanning resolution in the Resolution drop-down list.
the right side of the interface to display hidden working windows.
original and display the preview image in the Preview area.
be scanned by dragging a rectangle around it. You will see a flashing frame
(marquee) around the selected area.
films you intend to scan.
a) Click the "New" button (+) next to the Scan Job Queue window. A new
scan job will be added to the list, and a new scan frame (flashing) will
appear in the Preview area.
) to open the Scan Settings interface
) in the Preview window, and choose the area to
), check the