Channel Selection On Amy 2 Modes Io - SOMFY Amy 2 Modes io Instructions Manual

Amy 2 Modes io

2.1.Channel selection on Amy 2 Modes io

▪ A brief press on one button of the channel selector selects this channel: the
green LED on this button lights up, this channel is selected.
▪ A brief press on a lighted button of the channel selector deselects this channel:
the green LED goes out, this channel is no longer selected.
If no new channel is selected before sending an order, the last selection of channel(s) is used.
When Amy 2 Modes io is switched On, one or several channels can be selected at the
same time: the green LEDs on these buttons light up together to show which
channels are selected.
When Amy 2 Modes io is switched Off, only one channel can be selected at a time to
enable motorised products to be paired by channel.
©
Copyright 2024 SOMFY ACTIVITES SA. All rights reserved.
EN
...
...
5