Download
Share
Print this page
Renesas RZ/V2H Hardware Manual
  1. Manuals
  2. Brands
  3. Renesas Manuals
  4. Motherboard
  5. RZ/V2H
  6. Hardware manual
Renesas RZ/V2H Hardware Manual

Renesas RZ/V2H Hardware Manual

Evaluation board kit (secure type)
Hide thumbs

Advertisement

Quick Links

Download this manual
Cover
RZ/V2H Evaluation Board Kit
(Secure type)
Hardware Manual
Rev.1.04 Aug, 2024
www.renesas.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the RZ/V2H and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Renesas RZ/V2H

Summary of Contents for Renesas RZ/V2H

  • Page 1 Cover RZ/V2H Evaluation Board Kit (Secure type) Hardware Manual Rev.1.04 Aug, 2024 www.renesas.com...
  • Page 2 Renesas Electronics disclaims any and all liability for any damages or losses incurred by you or any third parties arising from the use of any Renesas Electronics product that is inconsistent with any Renesas Electronics data sheet, user’s manual or other Renesas Electronics document.
  • Page 3 Trademarks (continued) Examples of trademarks or registered trademarks used in the document of RZ/V2H; ® is a registered trademark of Arm Limited or its subsidiaries. ® MIPI is a registered trademark of MIPI Alliance, Inc. ® CSI-2 is a registered trademark of MIPI Alliance, Inc.
  • Page 4 SAFETY MATTERS SAFETY MATTERS Definitions of Symbols A variety of symbols are used in this document and on this product, to prevent the damage to harm and the property to you and other people beforehand by correctly using this product. This section, Safety Matters, presents these symbols and their meanings.
  • Page 5 WARNING Handling Related Warnings: Always check the jumper and switch settings before connecting a power source. An incorrect jumper or switch setting can lead to internal heat generation, rupture, ignition, or damage to this evaluation board itself or any connected equipment. If, during either the use or storage of this product, any abnormality in the product itself (including abnormal odors, heating, color changes, or changes to the shape of the product) are observed, disconnect the power supply immediately.
  • Page 6 CAUTION Handling: This product must be handled carefully. Do not cause a strong impact by dropping it, letting it fall, etc. Do not touch this product’s component pins with bare hands. Doing so may discharge static electricity that damages the Internal circuits. Eliminate static electricity before touching this product. When connecting or disconnecting cables to or from this product, hold the parts of the cable intended to be grasped (such as the plugs) and avoid putting stress on the cable.
  • Page 7 Table of Contents Overview ........................9 Features ............................10 Block Configuration ......................... 11 Specifications ..........................13 1.3.1 V2HEVK Specifications ......................13 1.3.2 V2HEVK Power Supply Specifications ................14 1.3.3 V2HEVK Accessories ......................14 1.3.4 Outer Appearance ........................ 14 Usage Notes ........................... 15 1.4.1 V2HEVK Power ON/OFF .....................
  • Page 8 4.16 AUDIO Interface ..........................29 4.17 Pmod Connector ..........................29 Supplementary Note ....................31 Power Supply ICs of V2HEVK ......................31 Assembly of Heat-sink ........................31 REVISION HISTORY ......................32...
  • Page 9 -based high-end RZ/V2H MPU from Renesas Electronics (RZ/V2H evaluation Board kit, hereafter V2HEVK). This manual describes the hardware functions of the V2HEVK. The V2HEVK consists of the RZ/V2H Secure Evaluation Board (CPU Board), RZ/V2H EVK Expansion Board (EXP Board). Board Name Overview ●...
  • Page 10 RZ/V2H Evaluation Board Kit (Secure type) 1. Overview Features This V2HEVK includes the following features. ● LPDDR4X: 64 Gb × 2 ● NOR Flash: 512 Mb ● ® ® MIPI CSI-2 connector: 4 ch. ● Gigabit Ethernet interface connector: 2 ch.
  • Page 11 RZ/V2H Evaluation Board Kit (Secure type) 1. Overview Block Configuration RGMII GBETH0 GigabitEther PHY S1.2V, S1.8V GigabitEthernet (Ch0) KSZ9131 Switching regulator DDR_VDDQLP_0.6V VDD4G_3p3 ETC_RESETN RJ-45 ISL80015 PMIC_MPIO2 LPDDR4X-SDRAM 64Gbit x2 0.6 V / Max 1.5 A LPDDR4X-3200 MT53E2G32D4DE-046 AIT:C DDR0...
  • Page 12 RZ/V2H Evaluation Board Kit (Secure type) 1. Overview D3.3V AUDIO AUX-OUT (P1) 3.5 mm Jack VDD1G_1p8 SSI3 Audio codec AUDIO HP-OUT (P2) DA7212 3.5 mm Jack GPIO connector I2C2 (J1) 50 (25×2) pin AUDIO MIC-IN (P3) (2.54 mm pitch) 3.5 mm Jack...
  • Page 13 RZ/V2H Evaluation Board Kit (Secure type) 1. Overview Specifications 1.3.1 V2HEVK Specifications Table 1.3-1 V2HEVK Specifications Item Specification R9A09G057H48GBG (RZ/V2H [GE3D, Security, ISP]) Board size CPU Board: 153 × 100 × 1.7 mm EXP Board: 153 × 100 × 1.7 mm...
  • Page 14 RZ/V2H Evaluation Board Kit (Secure type) 1. Overview 1.3.2 V2HEVK Power Supply Specifications The exact power required V2HEVK depends on the application and peripheral devices. Table 1.3-2 shows the power allocations. This board is designed to be supplied by a USB power supply that complies with the 100 W USB Power Delivery standard.
  • Page 15 Take sufficient care with setting up switches on the V2HEVK. Incorrect settings may lead to damage to devices. ● The RZ/V2H has the power-on and power-off sequences. With the V2HEVK, be sure to follow the precautions below. (1) When turning power on Be sure to check that the power slide switch SW2 and SW3 are turned off before connecting USB Type-C cable to Type-C connector (CN13).
  • Page 16 Open the FFC locking cover, align the FFC contacts to the bottom, and close the cover until it locks. The cover is fragile, so handle with care. Figure 2.1-1 Connect FFC to RZ/V2H EVK Expansion Board Connect the FFC to CPU Board Figure 2.1-2 Connect FFC to RZ/V2H Secure Evaluation Board.
  • Page 17 RZ/V2H Evaluation Board Kit (Secure type) 2. Operating Procedure Operation Mode Setting The tables below list the settings of the DIP switch (DSW1 on the RZ/V2H Secure Evaluation Board) and their functions. Table 2.2-1 DSW1 Connection Destinations and Function Switch No.
  • Page 18 RZ/V2H Evaluation Board Kit (Secure type) 2. Operating Procedure The tables below list the settings of the DIP switch (DSW3 on the RZ/V2H Secure Evaluation Board) and their functions. Table 2.2-4 DSW3 Function Switch No Signal Name Function I2C0_SCL OFF: MIPI CSI-2 (Ch0) SCL signal Pull-Up OFF...
  • Page 19 RZ/V2H Evaluation Board Kit (Secure type) 3. Layout Layout Parts Layout Figure 3.1-1 and Figure 3.1-2 show the pats layout diagrams of the RZ/V2H Secure Evaluation Board and Figure 3.1-3 shows the parts layout diagram of the RZ/V2H EVK Expansion Board. CN12 DSW2...
  • Page 20 RZ/V2H Evaluation Board Kit (Secure type) 3. Layout Figure 3.1-2 RZ/V2H Secure Evaluation Board Layout Diagram (Solder Side) R12UZ0147EJ0104 Rev.1.04 Page 20 of 34 Aug 20, 2024...
  • Page 21 RZ/V2H Evaluation Board Kit (Secure type) 3. Layout Figure 3.1-3 RZ/V2H EVK Expansion Board Parts Layout Diagram (Parts Side) R12UZ0147EJ0104 Rev.1.04 Page 21 of 34 Aug 20, 2024...
  • Page 22 RZ/V2H Evaluation Board Kit (Secure type) 3. Layout Lists of Main Parts Table 3.2-1 and Table 3.2-2 list the main parts of the RZ/V2H Secure Evaluation Board, RZ/V2H EVK Expansion Board, respectively. Table 3.2-1 RZ/V2H Secure Evaluation Board Parts List...
  • Page 23 Slide switch Power Switch (PMIC_RAA215300 ON/OFF) Debug Serial Interface The debugging port (micro USB Type-B connector (CN12)) is connected to the SCIF interface of the RZ/V2H via the USB-UART conversion IC. This port is for use in debugging. R12UZ0147EJ0104 Rev.1.04...
  • Page 24 RZ/V2H Evaluation Board Kit (Secure type) 4. Interface Specifications Debugger Interface Connect the ICE to the Arm JTAG connector (CN1). For the ICE having confirmed the connection, contact a Renesas Electronics sales representative. Note: The emulator connector has 10 pins with 1.27-mm pitch.
  • Page 25 RZ/V2H Evaluation Board Kit (Secure type) 4. Interface Specifications Table 4.6-2 MIPI CSI-2 Connector (CN8) Pin No. V2HEVK Connection Destination Pin No. V2HEVK Connection Destination RZ/V2H (CSI1_DATA2P) RZ/V2H (CSI1_DATA0N) RZ/V2H (CSI1_DATA0P) RZ/V2H (CSI1_DATA3N) RZ/V2H (CSI1_DATA3P) RZ/V2H (CSI1_DATA1N) RZ/V2H (CSI1_DATA1P) RZ/V2H (PB2)
  • Page 26 MIPI DSI Interface The V2HEVK has a MIPI DSI interface. This interface is connected from RZ/V2H of the CPU board to CN11 and is connected to CN5 of the EXP board with a dedicated FFC. The EXP board converts MIPI DSI to an HDMI signal and outputs it to the CN4 HDMI connector.
  • Page 27 SD2 is set to RZ/V2H SD1 interface. 4.11 PCIe Connector The V2HEVK has a PCIe ×4 connector (PCIe1). This connector is connected to the PCIe interface of the RZ/V2H. 4.12 Pin Header The V2HEVK has five pin headers. The specifications are listed below.
  • Page 28 RZ/V2H Evaluation Board Kit (Secure type) 4. Interface Specifications Table 4.12-2 GPIO CN (J2) (Stacking connection to EXP board) Pin No. V2HEVK Connection Destination Pin No. V2HEVK Destination RZ/V2H (P56) RZ/V2H (P86) RZ/V2H (P57) RZ/V2H (P87) RZ/V2H (P60) RZ/V2H (P90)
  • Page 29 20 V (maximum 5 A) from the USB-PD power supply. 4.15 HDMI Interface The EXP Board has an HDMI interface. The HDMI Type-A connector (CN4) is connected to the RZ/V2H MIPI DSI interface via a DSI-HDMI conversion IC. 4.16 AUDIO Interface The EXP Board has three audio connectors.
  • Page 30 RZ/V2H Evaluation Board Kit (Secure type) 4. Interface Specifications Table 4.17-2 Pmod Type 2A SPI (CN2) Pin No. Pmod Pin Spec. V2HEVK Connection Destination SSLA RZ/V2H (PA7) via level shifter U5 MOSI RZ/V2H (PB4) via level shifter U5 MISO RZ/V2H (PB3) via level shifter U5 RZ/V2H (PB5) via level shifter U5 +3.3 V (D3.3V)
  • Page 31 In consideration of the evaluation usage, the power supply ICs of V2HEVK are selected with a margin. The power supply ICs that suits the user circuit are recommended. For inquiries about power supply ICs, contact a Renesas Electronics sales representative.
  • Page 32 RZ/V2H Evaluation Board Kit (Secure type) REVISION HISTORY REVISION HISTORY RZ/V2H Evaluation Board Kit Hardware Manual REVISION HISTORY Description Rev. Date Page Summary ⎯ 1.00 Dec 14, 2023 First edition issued 1.01 Mar 1, 2024 Table 3.2-1 “RAA215300” Part Name, modified.
  • Page 33 Colophon RZ/V2H Evaluation Board Kit (Secure type) Hardware Manual Publication Date: Rev.1.00 Dec 14, 2023 Rev.1.01 Mar 1, 2024 Rev.1.02 Apr 10, 2024 Rev.1.03 Jun 25, 2024 Rev.1.04 Aug 20, 2024 Published by: Renesas Electronics Corporation...
  • Page 34 Back Cover RZ/V2H Evaluation Board Kit (Secure type) R12UZ0147EJ0104...
  • Page 35 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Renesas Electronics RTK0EF0168C04000BJ...