Renesas RZ SMARC Series Hardware User Manual
  1. Manuals
  2. Brands
  3. Renesas Manuals
  4. Motherboard
  5. RZ SMARC Series
  6. Hardware user manual
Renesas RZ SMARC Series Hardware User Manual

Renesas RZ SMARC Series Hardware User Manual

Carrier board ii
Hide thumbs Also See for RZ SMARC Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Cover
RZ SMARC Series Carrier Board II
Renesas Microprocessor
RZ Family / RZ/G Series
All information contained in these materials, including products and product specifications,
represents information on the product at the time of publication and is subject to change by
Renesas Electronics Corp. without notice. Please review the latest information published by
Renesas Electronics Corp. through various means, including the Renesas Electronics Corp.
website (http://www.renesas.com).
www.renesas.com
User's Manual: Hardware
Rev.1.00 Nov, 2023
Renesas Electronics Corporation. All rights reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RZ SMARC Series and is the answer not in the manual?

Questions and answers

Related Manuals for Renesas RZ SMARC Series

Summary of Contents for Renesas RZ SMARC Series

  • Page 1 All information contained in these materials, including products and product specifications, represents information on the product at the time of publication and is subject to change by Renesas Electronics Corp. without notice. Please review the latest information published by Renesas Electronics Corp. through various means, including the Renesas Electronics Corp.

  • Page 2: Corporate Headquarters

    Renesas Electronics disclaims any and all liability for any damages or losses incurred by you or any third parties arising from the use of any Renesas Electronics product that is inconsistent with any Renesas Electronics data sheet, user’s manual or other Renesas Electronics document.
  • Page 3 Renesas or its affiliates shall in no event be liable for any loss of profit, loss of data, loss of contract, loss of business, damage to reputation or goodwill, any...
  • Page 4 Microcontroller Unit Products The following usage notes are applicable to all Microprocessing unit and Microcontroller unit products from Renesas. For detailed usage notes on the products covered by this document, refer to the relevant sections of the document as well as any technical updates that have been issued for the products.

  • Page 5: Table Of Contents

    Table of Contents Introduction ........................7 Kit Contents ............................9 Assembly ............................10 System Description ..................... 11 G3S SMARC EVK Functional Block ....................13 G3S SMARC EVK Interface Mapping .................... 14 Board Configuration and Status ..................... 16 VBUS_SEL – Main Power ....................16 2.3.1 VBAT_SEL –...
  • Page 6 CAN ..............................43 3.10 uSD1 Card Interface ........................43 3.11 M.2 ..............................44 3.11.1 M.2 Key E ..........................44 3.11.2 M.2 Key B ..........................45 3.12 Display ............................47 3.12.1 HDMI ............................ 47 3.12.2 DISP0 and DISP1 ........................ 47 3.13 I2C ..............................

  • Page 7: Introduction

    RZ SMARC Series Carrier Board II Introduction The RZ SMARC Series Carrier Board II (hereinafter referred to as ‟RZ SMARC Carrier II”) is an 8-layer 190x130mm PCB, a platform designed according to the SMARC 2.1.1 Specification providing a carrier for Renesas RZ SMARC Module boards.
  • Page 8 RZ Family / RZ/G Series 1. Introduction The key features of the RZ SMARC Carrier II are as follows. Board Features Details Power supply USB Type-C with USB-PD support (input range: 5V2A to 20V4A) Memory Micro SD card slot with default, high-speed, UHS-I/SDRR50, SDR104 transfer modes support Supported interface and peripherals 4x USB2.0 Host interface, Type A 1x USB2.0 OTG interface, Type microAB...

  • Page 9: Kit Contents

    RZ Family / RZ/G Series 1. Introduction Kit Contents The following components are included in the RZ SMARC Series Carrier Board II Kit (P/N: RTK9SMCBB2B01000BE). ● RZ SMARC Series Carrier Board II − Fitted with RZ SMARC Series MIPI-DSI to HDMI conversion adaptor board (P/N: RTK9SMCABDB00000BE) to DISP0 (hereinafter referred to as "SMARC MIPI-DSI to HDMI Adaptor")

  • Page 10: Assembly

    RZ/G3S SMARC Module Board Kit (P/N: RTK9843S33C01000BE) − RZ/G3S SMARC Module board − RZ SMARC Series JTAG adaptor cable (P/N: RTK9SMCABJB00000BE) NOTE The Module will have been fitted to the Carrier using the 7off M2.5 x4mm pan-head machine screws. Assembly The RZ SMARC Carrier II can only be used when fitted with a SMARC compliant Module board.

  • Page 11: System Description

    Grove connector USB3 Host Type-A x2 USB2 Host USB3 Type-C LAN connector x2 connector M2E DISP SEL SW Type-A Type-A x2 Figure 2.1 RZ SMARC Series Carrier Board II Top View R01UH1077EJ0100 Rev.1.00 Page 11 of 65 Nov 14, 2023...
  • Page 12 Connector LVDS Display connector DSI/LVDS Display connector The RZ SMARC Series MIP-DSI to HDMI conversion adaptor board is not bundled with the RZ/G3S SMARC Evaluation Board Kit. Figure 2.2 RZ SMARC Series Carrier Board II Bottom View R01UH1077EJ0100 Rev.1.00...

  • Page 13: G3S Smarc Evk Functional Block

    M.2 Control SLEEP_BTN SD0_DEV_SEL SLG7RN46131 DIPSW GreenPAK (S2R) STG3692 RESET_SW ISL28022FRZ SD ch2 Pin Multi Power MONITOR RAA215300A2GNP#HA3 SW_SD2_EN Renesas PMIC DIPSW RIIC ch1 SLG4AR45948 Switch setting Display External SLG7RN46420 74CBTLV3257PGG STG3692 SSI ch0 GreenPAK (LDO) Switch Pin Multi HD3SS3220RNH M.2 Key E...

  • Page 14: G3S Smarc Evk Interface Mapping

    RZ Family / RZ/G Series 2. System Description G3S SMARC EVK Interface Mapping Renesas parts are highlighted. Table 2.1 Interface Mapping (1/2) SMARC RZ/G3S Interface Name Device Part Number Description USB0 USB2.0 629105150921 USB Type-microB receptacle USB1 USB2.0 uPD720115K8-711-BAK-A USB Hub IC...
  • Page 15 RZ Family / RZ/G Series 2. System Description Table 2.1 Interface Mapping (2/2) SMARC RZ/G3S Interface Name Device Part Number Description — SD/MMC 1040310811 USB Type-microB receptacle MTFC64GASAQHD-IT 64GB eMMC memory SDIO SD/MMC 1040310811 USB Type-microB receptacle — SD/MMC 1040310811 USB Type-microB receptacle —...

  • Page 16: Board Configuration And Status

    RZ Family / RZ/G Series 2. System Description Board Configuration and Status The RZ SMARC Carrier II has many switched configuration options and on-board interfaces. These are described in detail in the following sections. Default settings are highlighted. VBUS_SEL – Main Power 2.3.1 Figure 2.4 The Location and the Default Setting of the VBUS_SEL...

  • Page 17: Vbat_Sel - Vdd_Rtc Power

    RZ Family / RZ/G Series 2. System Description VBAT_SEL – VDD_RTC Power 2.3.2 Figure 2.5 The Location and the Default Setting of the VBAT_SEL The power to the SMARC Module required for VDD_RTC may be provided by a regulator or coin cell battery (not provided).

  • Page 18: Sw_Pwr_12V － Pcie Slot Power

    RZ Family / RZ/G Series 2. System Description SW_PWR_12V － PCIe Slot Power 2.3.3 Figure 2.6 The Location and the Default Setting of the SW_PWR_12V The 12V power supply to the PCIe Slot may be provided by a regulator or external supply. The power source is selected with SW_PWR_12V.

  • Page 19: Rsvd_Pwr - Module Power

    RZ Family / RZ/G Series 2. System Description RSVD_PWR – Module Power 2.3.4 Figure 2.7 The Location and the Default Setting of the RSVD_PWR The SMARC specification restricts the module power to 25W (5.0V, 10 pins @0.5A). However, the RZ SMARC Carrier II can make use of the Module RSVD pins and increase this value.

  • Page 20: Pmod_Pwr_Sel - Pmod Power

    RZ Family / RZ/G Series 2. System Description PMOD_PWR_SEL – PMOD Power 2.3.5 Figure 2.8 The Location and the Default Setting of the PMOD_PWR_SEL PMOD interfaces support either 3.3 V or 5.0 V. A 2mm header is used to select the power level for PMOD0 (Type-2A) and another 2mm header is used to select the power level for PMOD1 (Type-3A and Type 6A).

  • Page 21: Sw_Pmod0_Pwr_Slp - Pmod Power/Sleep Control

    RZ Family / RZ/G Series 2. System Description SW_PMOD0_PWR_SLP – PMOD Power/Sleep Control 2.3.6 Figure 2.9 The Location and the Default Setting of the SW_PMOD0_PWR_SLP PMOD0 has the capability to drive the POWER_BTN# and SLEEP# signals of the RZ SMARC Carrier II by configuring SW_PMOD0_PWR_SLP.

  • Page 22: Sw_Gpio_Opt_Sel - Gpio Options

    RZ Family / RZ/G Series 2. System Description SW_GPIO_OPT_SEL – GPIO Options 2.3.7 Figure 2.10 The Location and the Default Setting of the SW_GPIO_OPT_SEL GPIO10 may be used for DISP_INT# or PMOD1. GPIO2 may be used for CAM0_RST# or DISP_INT#. DIP Switch “SW_GPIO_OPT_SEL”...

  • Page 23: Sw_Gpio_Can_Pmod - Can Standby

    RZ Family / RZ/G Series 2. System Description SW_GPIO_CAN_PMOD – CAN Standby 2.3.8 Figure 2.11 The Location and the Default Setting of the SW_GPIO_CAN_PMOD GPIO8 and GPIO9 may be used for CAN standby or PMOD1 GPIO. DIP Switch “SW_GPIO_CAN_PMOD” Setting (1/2) Table 2.9 SW_GPIO_CAN_PMOD-1 GPIO8...

  • Page 24: Sw_Mode - Boot Mode (And Power)

    RZ Family / RZ/G Series 2. System Description SW_MODE – Boot Mode (and Power) 2.3.9 Figure 2.12 The Location and the Default Setting of SW_GPIO_OPT_SEL As described in the SMARC specification, the Module boot mode can be configured as follows. DIP Switch “SW_MODE”...

  • Page 25: Sw_M2_Dis - M.2 Card Control Signals

    RZ Family / RZ/G Series 2. System Description SW_M2_DIS – M.2 Card Control Signals 2.3.10 Figure 2.13 The Location and the Default Setting of the SW_M2_DIS The M.2 cards may require control signals that are not in scope of the SMARC specification. The RZ SMARC Carrier-II provides options for ●...
  • Page 26 RZ Family / RZ/G Series 2. System Description DIP Switch “SW_OPT_MUX” Settings (3/4) Table 2.11 SW_M2_DIS[3] SW_M2_DIS[4] M.2 Key B: RESET# Controlled by I2C_PM Byte 0x7A bit 5 (toggle) Inverted GPIO8 Open. Pull-up is expected on the M.2 card. DIP Switch “SW_OPT_MUX” Settings (4/4) Table 2.11 SW_M2_DIS[4] M.2 Key B: FULL_CARD_POWER_OFF...

  • Page 27: Sw_Opt_Mux

    RZ Family / RZ/G Series 2. System Description 2.3.11 SW_OPT_MUX Figure 2.14 The Location and the Default Setting of the SW_OPT_MUX To support legacy modules and provide greater flexibility, the RZ SMARC Carrier II provides multiplexing options for SDIO, I2S and SER0. DIP Switch “SW_PCIE_MUX”...
  • Page 28 RZ Family / RZ/G Series 2. System Description DIP Switch “SW_PCIE_MUX” Settings (4/4) Table 2.12 SW_OPT_MUX[4] SER0 The SMARC SER0 signals are routed to PMOD1. Note: M.2 Key E has no UART connection. The SMARC SER0 signals are routed to M.2 Key E UART. Note: PMOD1 has no UART connection.

  • Page 29: Sw_Pcie_Mux

    RZ Family / RZ/G Series 2. System Description 2.3.12 SW_PCIE_MUX Figure 2.15 The Location and the Default Setting of the SW_PCIE_MUX The RZ SMARC Carrier II supports SMARC Modules with the following PCIe configurations. ● 1x Channel, 1-Lane ● 2x Channel, 1-Lane ●...
  • Page 30 RZ Family / RZ/G Series 2. System Description DIP Switch “SW_PCIE_MUX” Settings (3/4) Table 2.13 SW_PCIE_MUX[3] PCIE MUX3 Refer to Table 2.14, Usable PCIe Configurations for details High DIP Switch “SW_PCIE_MUX” Settings (4/4) Table 2.13 SW_PCIE_MUX[4] USB2/M.2 Key B The SMARC USB2 signals are routed to the M.2 Key B interface. Note: The USB3.2 Type-A interface on the Carrier cannot be used.
  • Page 31 RZ Family / RZ/G Series 2 System Description In case of the RZ/G3S, this processor supports 1lane for PCIe Interface. Only hatched "SW_PCIE_MUX" DIP switch settings are supported on the G3S SMARC EVK. Table 2.14 Usable PCIe Configurations SW_PCIE_MUX PCIe Slot M.2 Key E M.2 Key B Link Configuration...

  • Page 32: User Io

    RZ Family / RZ/G Series 2. System Description User IO 2.4.1 Push Buttons 2.4.1.1 POWER, RESET, SLEEP These push buttons are used to connect SMARC Module signals to ground. The SMARC Module inputs are open-drain. The operation of each push button is dependent on the connected module. Table 2.15 Features of Each Push Button Label...

  • Page 33: Led Indicators

    RZ Family / RZ/G Series 2. System Description 2.4.2 LED Indicators 2.4.2.1 Power Four LED indicators are used to provide the user with power status. Table 2.17 Features of Each Indicator for Power Status Label Color Status (when lit) VBUS_FAULT The connected USB-C power supply is not capable of providing the minimum current and/or minimum voltage as set by...

  • Page 34: Recommended Operating Condition

    RZ Family / RZ/G Series 2. System Description Recommended Operating Condition Table 2.21 lists operating conditions of the RZ SMARC Carrier II. Table 2.21 Operating Conditions of RZ SMARC Carrier II Symbol Item Rated Value Note USBC_PWR_IN Power voltage 15 V Reference: VSS —...

  • Page 35: Functional Specifications

    RZ Family / RZ/G Series 3. Functional Specifications Functional Specifications This section provides details of the RZ SMARC Carrier II interfaces. Power Figure 3.1 shows a block diagram of power system of the G3S SMARC EVK. This board has one USB Type-C receptacle for power input with USB Power Delivery. The input voltage of VBUS can be selected among 5 V, 9 V, 15 V, and 20 V.

  • Page 36: Usb-C - Main Power

    RZ Family / RZ/G Series 3. Functional Specifications USB-C – Main Power 3.1.1 The RZ SMARC Carrier- II primary power input is from the USB -Type-C connected to a power delivery device (not provided). BAT_RTC – VDD_RTC Power 3.1.2 A 3.0V coin cell battery may be fitted to provide VDD_RTC power as an alternative to the on-board regulator. The advantage of using a coin cell is that power is maintained when USB-C main power is removed.

  • Page 37: Clock

    RZ Family / RZ/G Series 3. Functional Specifications Clock Clock inputs required for peripherals such as FT232HQ, USB Hub, M.2 Key E Card Module, HDMI Transmitter are generated locally using separate crystals or oscillators. The crystals or oscillators used to provide the reference clocks for the G3S SMARC EVK peripherals are shown in the table below.

  • Page 38: Serial Uart

    RZ Family / RZ/G Series 3. Functional Specifications Serial UART 3.3.1 SER1_UART A 4-pin connector (Seeed Technology, part number 110990037) provides connection to SER1. Table 3.2 SER1 Pin Assignment Pin Number Signal SER1_RX SER1_TX 1.8 V Ground Note: TX and RX signals are at 1.8 V levels. 3.3.2 SER3_UART Connection to SER3 is via a micro-USB interface.

  • Page 39: Usb

    RZ Family / RZ/G Series 3. Functional Specifications The RZ SMARC Carrier II provides interfaces for the following. Table 3.3 Supported Interfaces of Each USB SMARC IO Connector Type USB0 USB2.0 micro USB OTG USB1 USB2.0 Stacked Type-A Connected from a 4-channel USB hub IC USB2 USB3.0 Type-A USB3...

  • Page 40: Camera

    RZ Family / RZ/G Series 3. Functional Specifications Camera The SMARC specification defines two MIPI CSI serial camera interfaces. The defined CSI0 interface supports up to two differential data lanes (CSI0_D[0:1]+/- signals). CSI1 may be implemented with up to four differential data lanes (CSI1_D[0:3]+/- signals) to support higher resolution cameras.

  • Page 41: Pmod

    RZ Family / RZ/G Series 3. Functional Specifications PMOD The RZ SMARC Carrier II provides 3 PMOD interfaces, although there is some signal overlap, so care must be taken if both PMOD1 types are required simultaneously. SER0 and some GPIOs are multiplexed, so refer to the relevant configuration settings to ensure the signals are available.

  • Page 42: Audio

    RZ Family / RZ/G Series 3. Functional Specifications Audio The mono SPEAKER connection is provided by a 2-pin header, 2.54mm pitch. All other audio connections are made using stereo connections to the 3.5mm colored jack sockets. Signal lines support stereo. Table 3.6 Functions of Each Jack Color...

  • Page 43: Can

    RZ Family / RZ/G Series 3. Functional Specifications The RZ SMARC Carrier II provides 2 CAN channels, each connected through a 3-pin connector (JST, part number SM03B_SRRS-TB). Table 3.7 CAN0 and CAN1 Pin Assignment Pin Number CAN0 CAN1 CAN0_H CAN1_H CAN0_L CAN1_L Ground...

  • Page 44: M.2 Key E

    RZ Family / RZ/G Series 3. Functional Specifications 3.11 Both Key E and Key B interfaces are provided for the RZ SMARC Carrier II. 3.11.1 M.2 Key E A threaded spacer for Type-2230 is already inserted into the RZ SMARC Carrier II for mounting a plug-in M.2 Key E card.

  • Page 45: Key B

    RZ Family / RZ/G Series 3. Functional Specifications Table 3.9 M.2 Key E Pin Assignment (2/2) Signal Signal SER0_RX/SER2_RX SDIO_RESET# TP_M2E_UART_WAKE# TP_M2E_SDIO_WAKE# Not connected SDIO_D3 M2E_LED2 (Red) SDIO_D2 I2S2_SDOUT SDIO_D1 I2S2_SDIN SDIO_D0 I2S2_LRCK SDIO_CMD I2S2_CK SDIO_CK M2E_LED1 (Red) Ground 3.3 V USB1_M2E- 3.3 V USB1_M2E+...
  • Page 46 RZ Family / RZ/G Series 3. Functional Specifications Table 3.11 M.2 Key B Pin Assignment (2/2) Signal Signal M2B_GPIO_3 * PCIE_M2B_TX0- M2B_GPIO_2 * Ground M2B_GPIO_1 * PCIE_M2B_RX0+ M2B_GPIO_0 * PCIE_M2B_RX0- M2B_DEVSLP * Ground SIM_PWR PCIE_M2B_TX1+/USB2_SSTX_M2B+ SIM_DATA PCIE_M2B_TX1-/USB2_SSTX_M2B- SIM_CLK Ground SIM_RESET PCIE_M2B_RX1+/USB2_SSRX_M2B+ M2B_GPIO_8 * PCIE_M2B_RX1-/USB2_SSRX_M2B-...

  • Page 47: Display

    RZ Family / RZ/G Series 3. Functional Specifications 3.12 Display The RZ SMARC Carrier II provides a micro-HDMI port for direct connection to the SMARC HDMI display interface and two further interfaces (DISP0 and DISP1) for LVDS/MIPI-DSI channels 0 and 1. By default, the RZ SMARC Carrier II is fitted with the SMARC MIPI-DSI to HDMI adaptor in DISP0.
  • Page 48 RZ Family / RZ/G Series 3. Functional Specifications Table 3.12 DISP0 Pin Assignment (2/2) Pin Number DISP0 Signal DISP0 Signal Pin Number Ground LCD0_BKLT_EN LVDS0_3+/DSI0_D3+ RESET_OUT# LVDS0_3-/DSI0_D3- DISP_INT# Ground Ground Not connected Not connected Not connected Not connected (DISP_ID) Table 3.13 DISP1 Pin Assignment Pin Number DISP1 Signal...

  • Page 49: I2C_Pm

    Address Mapping for I2C_PM I2C_PM Device 7-bit Address Renesas ISL28022FRZ (current monitor) 0x44 Renesas GreenPAK SLG4AR45947 (logic) 0x08 Renesas GreenPAK SLG4AE45948 (logic) 0x10 Renesas GreenPAK SLG4L45949 (PCIe mixing) 0x18 HD3SS3220RNH (USB-C port controller) 0x47 R01UH1077EJ0100 Rev.1.00 Page 49 of 65 Nov 14, 2023...

  • Page 50: I2C_Gp

    GEN_PURPOSE IO 3.13.2.1 Current Monitoring The SMARC Module current can be measured by using I2C_PM to read the Renesas ISL28022FRZ. 3.13.2.2 Board Configuration Using the I2C_PM bus, it is possible to read back the board configuration from many of the switches and M2B_CONFIG.

  • Page 51: I2C_Cam0, I2C_Cam1

    RZ Family / RZ/G Series 3. Functional Specifications 3.13.2.3 M.2 Key E Controls W_DISABLE1# and W_DISABLE2# control signals may be activated using the I2C_PM providing SW_M2_DIS[1], SW_M2_DIS[2] and SW_M2_DIS[4] are all ON. After power on or reset, both W_DISABLE1# and W_DISABLE2# control signals are driven low. Setting the relevant bit to ‘1’...

  • Page 52: Miscellaneous

    RZ Family / RZ/G Series 3. Functional Specifications 3.14 Miscellaneous 3.14.1 A 3-pin header is provided for connection to a standard fan IO. Table 3.20 FAN Pin Assignment Pin Number CAN0 Not connected (Sense) Power (12 V* Ground Note 1. If 5V is required, resistor fitting options are available.

  • Page 53: M2B_Gpio

    RZ Family / RZ/G Series 3. Functional Specifications 3.14.3 M2B_GPIO A 24-pin, 0.27mm pitch header from Sullins, part number GRPB122VWQS-RC, provides access to general purpose IO for M.2 Key B. Table 3.22 M2B_GPIO Pin Assignment Pin Number Signal Signal Pin Number M2B_REFE_CLK 1.8 V M2B_REFE_DATA...

  • Page 54: Smarc Module Connector

    RZ Family / RZ/G Series 3. Functional Specifications 3.15 SMARC Module Connector The 314 pin, 0.5mm pitch, R/A memory socket style connector is used to interface the SMARC Module. 3.15.1 Display Interfaces The RZ SMARC Carrier II provides two interfaces that may be used for LVDS, MIPI-DSI or eDP and a secondary HDMI.
  • Page 55 RZ Family / RZ/G Series 3. Functional Specifications These signals are routed to the HDMI connector. Table 3.26 HDMI Signals SMARC Signal Name Pin # RZ Port Pin Signal HDMI_D2+ HDMI_D2- P92 P93 HDMI_D1+HDMI_D1- P95 P96 HDMI_D0+ HDMI_D0- P98 P99 HDMI_CK+ HDMI_CK- P101 P102 HDMI_CTRL_CK...

  • Page 56: Camera Interfaces

    RZ Family / RZ/G Series 3. Functional Specifications 3.15.2 Camera Interfaces The RZ SMARC Carrier II provides two interfaces that may be used for MIPI-CSI. The CSI0 and CSI1 signals are not connected to the G3S SMARC Module. Table 3.27 CAM0 and CAM1 Signals SMARC Signal Name Pin #...

  • Page 57: Spi Interfaces

    RZ Family / RZ/G Series 3. Functional Specifications 3.15.4 SPI Interfaces The SPI1 signal is routed to the PMOD Type-2A connector. The SPI0 signal is not connected to the G3S SMARC Module. Table 3.29 SPI0 and SPI1 Signals SMARC Signal Name Pin # RZ Port Pin Signal...

  • Page 58: Audio

    RZ Family / RZ/G Series 3. Functional Specifications 3.15.5 Audio These signals are routed to the Audio Codec and M.2 Key E. Table 3.30 I2S0 and I2S2 Signals SMARC Signal Name Pin # RZ Port Pin Signal I2S0_LRCK P18_3 RZ_SSI3_RCK I2S0_SDOUT * P18_4 RZ_SSI3_TXD...

  • Page 59: Asynchronous Serial Ports

    RZ Family / RZ/G Series 3. Functional Specifications 3.15.7 Asynchronous Serial Ports The RZ SMARC Carrier II provides four interfaces that may be used for asynchronous serial ports. These signals are routed to the PMOD1 Type-3A connector, GROVE connector, M.2 Key E and DEBUG UART. SER2 is not connected to the G3S SMARC Module.

  • Page 60: Usb Interfaces

    RZ Family / RZ/G Series 3. Functional Specifications 3.15.9 USB Interfaces These signals are routed to the USB Type micro-AB and USB hub IC. The USB channels 2, 3, 4, and 5 signals are not connected to the G3S SMARC Module. Table 3.34 USB0 and USB1 Signals SMARC Signal Name...

  • Page 61: 3.15.12 Ethernet

    RZ Family / RZ/G Series 3. Functional Specifications 3.15.12 Ethernet These signals are routed to the RJ45 connectors. Table 3.36 GBE0 and GBE1 Signals SMARC Signal Name Pin # RZ Port Pin Signal — GBE0_MDI0+ These signals are provided by the Ethernet PHY controlled by the RZ RGMII signals GBE0_MDI0- ET0_xxx...

  • Page 62: 3.15.13 Gpio

    RZ Family / RZ/G Series 3. Functional Specifications 3.15.13 GPIO Table 3.37 GPIO Signals SMARC Signal Name Pin # RZ Port Pin Signal GPIO0 P108 Not connected GPIO1 P109 Not connected GPIO2 P110 Not connected GPIO3 P111 Not connected GPIO4 * P112 P18_0 RZ_IRQ2_GPIO4...

  • Page 63: Revision History

    RZ Family / RZ/G Series REVISION HISTORY RZ Family / RZ/G Series REVISION HISTORY RZ SMARC Series Carrier Board II REVISION HISTORY Description Rev. Date Page Summary ⎯ 1.00 Nov 14, 2023 First edition issued R01UH1077EJ0100 Rev.1.00 Page 63 of 65...
  • Page 64 Colophon RZ SMARC Series Carrier Board II User’s Manual: Hardware Publication Date: Rev.1.00 Nov 14, 2023 Published by: Renesas Electronics Corporation...
  • Page 65 Back Cover RZ Family / RZ/G Series R01UH1077EJ0100...

This manual is also suitable for:

Rz/g seriesRz/g3s

Table of Contents