GeoVision GV-Cloud Bridge Pro Installation Manual page 25

11.2.1 Connecting to GV-Cloud Access Control
1. In the left menu, select Operation Mode > GV-Cloud Access Control / VPN.
2. Click Apply. When the device is rebooted, the mode will be applied.
3. In the left menu, click Service Settings > GV-Cloud Access Control.
◼
Account ID: Type your GV-Cloud account ID.
◼
Password: Create a password
4. Click Apply. When the device is added to GV-Cloud Access Control, the State will
display "Connected".
5. Add the GV-Cloud Bridge Pro to GV-Cloud Access Control. See 4.2.1 Adding a Device in
GV-Cloud Access Control User's
Access Control must match that created on the GV-Cloud Bridge Pro (Step
for the GV-Cloud Bridge Pro.
Manual. Note that the password entered on GV-Cloud
25
3).