Advertisement
Quick Links
Installation guide of Pandora security-service and remote start system for
Toyota Camry V70 2018 - ...
Push-to-Start button
Automatic transmission
Model code: 2144
WARNING! This installation manual has the status of recommendation.
This system MUST BE installed by a certified technician.
Connect the wires only when the base unit is disconnected.
It's prohibited to place the wires near sharp elements and moving parts of a car. Wiring through the
holes should be passed using special rubber bushings.
The car's electrical scheme and wire colors may differs from the information shown in this guide, so
suggested connection points MUST BE checked before installation.
www.pandorainfo.com
e-mail:
support@pandorainfo.com
Page 1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Pandora 2144
Summary of Contents for Pandora 2144
- Page 1 Installation guide of Pandora security-service and remote start system for Toyota Camry V70 2018 - ... Push-to-Start button Automatic transmission Model code: 2144 WARNING! This installation manual has the status of recommendation. This system MUST BE installed by a certified technician.
- Page 2 Switch the base unit to program mode by entering «service PIN-code» using Valet button (1-1-1-1 by default); • Update the firmware of the base unit, then update Bluetooth firmware using «Pandora Specialist» app, choose the vehicle model and adjust the settings of security system in accordance with the «System settings»...
- Page 3 BACK COMMANDS AND STATUSES Statuses Commands Model code 2144 • • • • • • • • • • • • • • • • • • • • • • CAN 1 Advanced parameters for Advanced Security systems that support advanced parameters:...
- Page 4 SECURITY SYSTEM SETTINGS Name Item Setting Note 1.1.1 Setting of the warning level of the shock sensor Test the sensitivity after Setting of the alarm level of the shock sensor 1.1.2 installation. Adjust if Setting of the alarm level of the motion sensor 1.1.3 necessary 1.1.4...
- Page 5 CONNECTION POINTS LOCATION Module «K 53» «Smart Key» connector module Fig.1 - BCM module location, to the left of steering column. Fig.2 - «Smart Key» module location. «K 62» Pin#18, white/black connector «GND» Fig.3 - «K 62» «Smart Key» module connector. Fig.4 - «GND»...
- Page 6 CONNECTION POINTS LOCATION «K 62» connector Pin#15, red +12V Fig.7 - «K 62» «Smart Key» module connector. Fig.8 - «+12V wire». «K 62» connector Pin#17, red Ignition (+) Fig.9 - «K 62» «Smart Key» module connector. Fig.10 - «Ignition» output. «K 62»...
- Page 7 CONNECTION POINTS LOCATION Pin#17, beige Unlock (-) «K 53» connector Fig.13 - «K 53» BCM module connector. Fig.14 - Central lock «Unlock» input. BACK www.pandorainfo.com e-mail: support@pandorainfo.com Toyota Camry V70 2018 - ... Page 7...
- Page 8 Unlock (-) Use analog central lock control when it’s necessary to disarm «K 53» BCM the car from Pandora’s tag/fob/application. Change defaulted connector setting of vehicle’s theft deterrent system «Security control with mechanism key» from OFF to ON using dealer (Techstream) or similar scan tool.
- Page 9 BACK LEARNING AT THE VEHICLE 1. Switching to the program mode. Conditions: - System is disarmed; Press - System is not in the service mode; shortly 1 time - Ignition is OFF. With ~ 2 sec. pause Enter «Service PIN-code» (1-1-1-1 by default) short one-time (for code 1-1-1-1) pressings of the «Valet»...
Need help?
Do you have a question about the 2144 and is the answer not in the manual?
Questions and answers