Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Satel CA10 plus
Summary of Contents for Satel CA10 plus
- Page 1 SATEL CA10 plus with LCD Keypad User Manual GDANSK, POLAND ca10plcu_e 10/00...
- Page 2 Control panel CA 10 plus with an LCD keypad Alarm control panel CA10 plus is a modern, microprocessor-based device designed for signaling burglaries and assaults. The CA-10 plus panel controls the operation of an alarm system, responds to information coming from the alarm system detectors about an intrusion on a protected facility and informs about the event.
- Page 3 Control panel CA10 plus with LCD keypad - User's Guide Armed modes To adapt the alarm system to various needs the control panel CA-10 plus offers several armed modes: Audible armed mode The mode in which detectors connected to the panel control the protected facility and violation of the protected zones is signaled by the panel with all available means (sirens, monitoring stations message transmission, telephone messages).
- Page 4 Control panel CA10 plus with LCD keypad - User's Guide User access codes For everyday operation of the system assigning user access code is essential. The control panel comes with one factory-set code (master user code) for each partition: 1234 for partition 1,...
- Page 5 Control panel CA10 plus with LCD keypad - User's Guide • access code entered is incorrect - the control panel signalizes the event with two long beeps • in the partition there are no armed type zones - the control panel signalizes the event with two long beeps (access code is correct and allows, for example, to call user functions).
- Page 6 Control panel CA10 plus with LCD keypad - User's Guide On receiving the call the control panel sends: • one beep a second - if, since the last arming time, there no alarm occured; • speech synthesizer message - if the alarm occurred within the last hour;...
- Page 7 Control panel CA10 plus with LCD keypad - User's Guide User "HOLD DOWN" Functions The functions are available to every user (without entering any access code). They are activated by holding the function key down for a short time. Switching to n partition (GO TO n) In alarm systems divided into several partitions (subsystems) single keypad control over the whole system is possible.
- Page 8 Control panel CA10 plus with LCD keypad - User's Guide The control panel detects the following problems: "No 220V power supply" - the control panel is equipped with back-up power supply that enables it to function for a specified period of time. If, however, the "non 220V power supply"...
- Page 9 Control panel CA10 plus with LCD keypad - User's Guide Fire Alarm The function enables switching on/off of fire alarm by means of the keypad. Auxiliary The purpose of the alarm depends on the current needs. It may, for instance, be an emergency call for doctor's help.
- Page 10 Control panel CA10 plus with LCD keypad - User's Guide Access Code Change (function 1) The function enables changing the access code of the user who called it. On calling the function a new code should be entered and confirmed by pressing (#) key.
- Page 11 Control panel CA10 plus with LCD keypad - User's Guide Numeric mode Text mode deletes the character before the the previous character in the cursor alphabet switches between insert/typeover the next character in the modes alphabet space While programming text messages the keys...
- Page 12 Control panel CA10 plus with LCD keypad - User's Guide The function is not available for user with authority level 5, 6, 0. Setting Time (function 6) The programmable parameters (time, data, year) can be edited with additional keys: keys position the cursor,...
- Page 13 Control panel CA10 plus with LCD keypad - User's Guide Technical Reliability of the Alarm System The alarm system is built of the devices whose reliability is vital in effectiveness of offered protection. The elements of the alarm system are subject to various outside...
- Page 14 ALARM - alarm in the current LCD DISPLAY: time and date or partition FAILURE signals failure partition name and system status message detection in the system - to check press key for 3 seconds - pressing any of the keys for 3 seconds switches to one of the four partitions PARTITION 1, 2, 3, 4 CA-10 LCD...
Need help?
Do you have a question about the CA10 plus and is the answer not in the manual?
Questions and answers