CyClone RT2E Modern 250 User Manual page 40

Throttle cable adjustment
2
1
Adjust the throttle cable by turning the adjusting nut to achieve the
correct free travel of the throttle handle.
1.When the free travel of the throttle handle is greater or less than
the standard value, it needs to be readjusted.
2.Method for adjusting the free travel of the throttle wire: loosen
the locking nut, turn the adjusting nut in or out until the
specified free travel is reached, and tighten the locking nut.
The standard value of the throttle handle is: 2mm〜6mm
1. Before adjusting the free travel of the throttle wire cable, the idle speed must be adjusted.
2. If the throttle valve wire cable is interfered with or worn, the accelerator handle and wire cable must
be removed for cleaning or replacement, and grease must be added.
Maintenance
warn
!
. 39 .