Maintenance
Air filter cleaning
. 36 .
1
2
When the air filter element is clogged with dust, the resistance of the
intake system will increase, the mixture will be too rich, the power
will decrease, and the fuel consumption will increase. Therefore, the
filter element should be checked, cleaned and replaced regularly
.
1.Remove the air filter element.
2.Use compressed air to blow away the dust and dirt on the paper
filter element or replace the paper filter element.
Clean the filter screen with a neutral solution and blow it dry.
1. When installing the filter element, it should be installed correctly in a fixed position. When driving in dusty areas,
the filter element maintenance cycle should be shortened.
2. It is forbidden to use the following cleaning agents to clean the filter, such as gasoline, low ignition point
solvents, acids, alkalis, and organic volatile oils.
3. Do not start the motorcycle without installing the filter element, otherwise it will cause excessive wear of the
piston, piston ring and cylinder body.
4. To clean the air filter, you should go to our company's authorized service center for maintenance and filter
element replacement regularly.
Danger
!
Need help?
Do you have a question about the RT2E Modern 250 and is the answer not in the manual?