CyClone RT2E Modern 250 User Manual page 28

Things to check before driving
Before driving, you should check according to the following requirements to ensure the user's safe driving and smooth driving.
project
Serial number
1
Fuel System
2
lubricating oil
3
Electrical Parts
4
Battery
5
Brake handle
6
Throttle handle
7
Steering mechanism
8
Tires/Wheels
9
Lighting/signal indicators
10
Brakes
11
Main bracket/side bracket
12
Full vehicle fasteners
Check the fuel capacity and check whether the fuel valve is leaking.
Check whether the lubricating oil has deteriorated and whether the capacity is below the lower scale line
Check whether the power supply and power supply of the entire vehicle's electrical parts are normal
Check if the voltage is below 12V
Check whether the free stroke is within the specified value
Check the flexibility of the throttle handle and the stroke of the throttle handle (2 to 6) mm
Check the flexibility and stability of the steering mechanism
Check tire pressure and wear
Check whether the lighting/signal/indicator lights are working properly
Check the wear of the brake shoes and whether the braking performance is good.
Check whether the main bracket/side bracket is bent or deformed, and whether the return position is good.
Check whether the fasteners of the whole vehicle are loose or falling off
examine
Operation Guide
Remark
According to the mileage and working conditions,
Motorcycles undergo three levels of maintenance:
First level maintenance:
1000km〜2000km, lubrication,
Fastening is the main content.
Secondary maintenance:
3000km〜6000km, to check,
Adjustment, lubrication and tightening are the main
Allow.
Three levels of maintenance:
6000km〜10000km, overall
Analysis, cleaning, inspection and adjustment, lubrication
Tighten, replace worn parts, eliminate hidden dangers
The main problem is illness.
Regular three-level maintenance is recommended to our
company
Installation by our authorized repair service center
Debugging and maintenance.
. 27 .