CyClone RT2E Modern 250 User Manual page 30

Starting and preheating
3
3.Press the electric start button to start the motorcycle.
4.After starting, preheat the motorcycle at idle speed for 3 to 5
minutes. The motorcycle can be driven normally only after it is
preheated.
1. In order to extend the service life of the motorcycle, when driving in a cold
state, please be sure to preheat it for 3 to 5 minutes before driving, and do not
drive at high speeds. When preheating, do not increase the throttle to
preheat.
2. If the engine cannot start, first turn off the ignition lock, wait for about 1
minute, then turn on the ignition lock and try to start again.
Operation Guide
warn
!
. 29 .