Download
Share
Print this page
Konvision IP25G Series Adding Memory Manual
  1. Manuals
  2. Brands
  3. Konvision Manuals
  4. Monitor
  5. IP25G Series
  6. Adding memory manual

Konvision IP25G Series Adding Memory Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
www.konvision.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the IP25G Series and is the answer not in the manual?

Questions and answers

Related Manuals for Konvision IP25G Series

Summary of Contents for Konvision IP25G Series

  • Page 1 www.konvision.com...
  • Page 2 V1.0.1 USER MANUAL Konvision Monitor IP25G Series LCD Monitors w w w k o n v i s i o n c o m...
  • Page 3 Parts and Functions ...... 6 Operating Mode Settings .....30 Front View ........6 System Settings ......30 Rear View ........7 IP25G Series Monitor Web Control OSD Menu ........9 Interface Description ..... 31 Menu Operation ......9 IP25G Series Monitor Web Control Menu Item Description ....
  • Page 4 14. If do not use the device for a long time, Notes please unplug the power cord from the AC outlet. 15. Please keep not less than 5cm space around the vents while using the monitor, Notes in order to obtain a good heat dissipation effect.
  • Page 5 This monitor is precise equipment and needs professional packing materials to transport. Please do not use packing materials provided by suppliers except KONVISION or its authorized packing material suppliers. When the following situations occur, please turn off the power, and do not insert the plug.
  • Page 6 Parts and Functions Front View Tally Indicator S1 Button and Indicator Tally indicator control in two ways: Press the S1 button, the indicator will turn blue. 1. GPI Interface (see the control method at GPI Currently, the S1 button switch to the configuration interface description behind) corresponding to the S1 button.
  • Page 7 S4 Button and Indicator IMAGEADJ (U/D) Knob Press the S4 button, the indicator will turn blue. When in the menu, spin this knob to select up/down Currently, the S4 button switch to the configuration operation. corresponding to the S1 button. When not in the menu, press the knob continuous, will appear following adjustment: Brightness: adjust the backlight of the image.
  • Page 8 HDMI IN/OUT AC IN and Switch HDMI signal input/output interface, Max support AC power supply. 4096×2160 60Hz. AC power input is powered on, switch to “I” to power on, switch to “O” to power off, and shut down. SDI 1 (IN/OUT) DC IN (Remark: only for a few models) 12G/6G/3G/HD-SDI input, output.
  • Page 9 OSD Menu Sub Menu Description Input Mode Display the current input mode. Input Format Display the current input format and Menu Operation resolution. Color Space Display the color space of the signal Press MENU/EXIT key to enter the main menu, and source.
  • Page 10 Config Settings: Sub Menu Description Channel Select Select different channel to view different signal parameter. Source Display the current input signal. Payload ID Display the Payload ID of the SDI signal. SMPTE Standard Display the SMPTE protocol of the SDI signal. Color Depth Display the Color Depth of the signal.
  • Page 11 Function Settings: Sub Menu Setting Option Description GPI 1 Set GPI 1 function. · GPI 1 function GPI 2 Set GPI 2 function. · GPI 2 function GPI 3 Set GPI 3 function. · GPI 3 function GPI 4 Set GPI 4 function. ·...
  • Page 12 Sub Menu Setting Option Description Sub Menu Setting Option Description Display Mode [Single]Select Single display. Win Border [OFF]Turn off Win Border in Quad [Quad]Select Quad display. Mode.[ON]Turn on Win Border in · Single Quad Model. · Quad · OFF · ON Win1 Win2 (Note: this function only available in...
  • Page 13 Sub Menu Setting Option Description Sub Menu Setting Option Description Win3 Border Width [3PX]Select 3PX width for border Channel Select Used for Zoon Ctrl, users can set line. [6PX]Select 6PX width for different color parameter for each border line. [8PX]Select 8PX width window.
  • Page 14 Image Settings: Sub Menu Setting Option Description R Saturation Red Saturation, default value: 50. · 0~200 G Saturation Green Saturation, default value: 50. · 0~200 B Saturation Blue Saturation, default value: 50. · 0~200 R Hue Red Hue, default value: 0. ·...
  • Page 15 Scope Settings: Sub Menu Setting Option Description Histogram [OFF]Close histogram. [LUMA]Display brightness histogram. [RGB]Display RGB histogram. · OFF · LUMA · RGB Measure Channel [Channel 1]Select to display channel 1 waveform separately. [Channel 2]Select to display channel 2 waveform separately.[Channel 3]Select to display channel 3 waveform separately.[Channel 4] Select to display channel 4 waveform...
  • Page 16 Sub Menu Setting Option Description Sub Menu Setting Option Description Focus Assist Level Focus Assist Level value 0-100. Marker Display [On]Turn on all markers.[Off]Turn · 0-100 off all markers. · On Zebra [ON]Turn on Zebra. · Off [OFF]Turn off Zebra. [OFF]No Aspect Marker.[4:3]Aspect ·...
  • Page 17 Audio Settings: Sub Menu Setting Option Description Box Display [OFF]Turn off Box Display. [ON]Turn on Box Display. · OFF · ON [OFF]Turn off Center. Box Center [ON]Turn on Center. · OFF · ON Box Mat The color of the filling outside the box wireframe.
  • Page 18 Sub Menu Setting Option Description Sub Menu Setting Option Description Meter Select [CH1-2]Select meter channel CH1-2. CC 708 [Service 1]708 select Service 1 type. [CH1-4]Select meter channel CH1-4. [Service 2]708 select Service 2 type. [CH5-6]Select meter channel CH5-6. [Service 3]708 select Service 3 type. [CH5-8]Select meter channel CH5-8.
  • Page 19 Sub Menu Setting Option Description Sub Menu Setting Option Description UMD Character1 UMD name of the single picture mode Tally Source [GPI]Select GPI Select. or Win1 in Quad mode. [TSL]Select TSL protocol control. · Channel1 · GPI (Note: UMD protocol should select ·...
  • Page 20 [OFF]Turn off source info. Source Info S1-S4 Key & Config 1-5 Settings [ON]Turn on source info. · OFF Konvision monitor supports the input of a variety of · ON signals. Since the UHD signals have various formats USB Mode [USB Flash Disk]Upgrading the and need to set parameters such as color gamut, monitor with USB Flash Disk.
  • Page 21 4. After saving, press the S1 key to call Config1. At this 1. Press MENU/EXIT key, then switch to Source time, the screen will display the SFP 1 signal. option, select Display Mode to Single, Input Mode to Signal Input, Win1 Source to HDMI. Quad Split Mode Win1 Win2...
  • Page 22 Operating Instructions LED status indicator. From left to right: 1. IP25G series monitor working mode status indicator Blue or green: the IP25G series monitor is set to working mode. Blue or green indicator steady on or off: the mainboard 4K ST2110 IP Interface Description of the IP25G monitor is damaged, please contact with Konvision or the authorized reseller.
  • Page 23 This chart introduce the Menu Display and Operation Select the Video Flow option and press the button to of the IP25G series monitor, including setting the enter the sub-menu, the menu is displayed as follows: working mode, setting the signal, setting the external synchronization mode, and setting the network parameters etc.
  • Page 24 Display the statistics about ST2110 Audio IP audio Menu item Description packets received by the current device. The IP25G series monitor can display the audio data Audio Flow Enable Enable: enable the ST2110 IP audio stream statistics of the currently received ST2110 data stream.
  • Page 25 IP network packets received by the current device. Audio Destination IP Set the multicast address of the The IP25G series monitor can display the audio data ST2022-7 Audio receiving audio stream for the receiving end to stream statistics of the currently received ST2110 receive.
  • Page 26 Description formats according to the system settings DHCP Enable: enable the DHCP dynamic Note: The IP25G series monitor is available in different host configuration protocol. 4K, 3G and HD SDI video formats, including 60p, Disable: disable the DHCP dynamic host configuration protocol.
  • Page 27 2.SFP Port 1 The IP25G series monitor supports the ability to detect Select the SFP Port 1 option and press the button to and verify if the SFP Port 1 is correctly connected to enter the sub-menu, the menu is displayed as follows: the network or not.
  • Page 28 IGMP V3 version from an authorized fiber networks. reseller. If the IP25G series monitor does not add the ST2022-7 Note: Users must to ensure the multicast address of option port, the MAC data status of the SFP Port 2 port the IP25G series monitor is the same as the multicast is not displayed.
  • Page 29 [1] Genlock Mode 4) Users can also enter the IP25G series monitor Select the Genlock Mode option and press the button to menu: 2.4.2.2 PTP Settings -> 2.4.2.2.2 PTP Status to enter the sub-menu, the menu is displayed as follows:...
  • Page 30 11) clockClass (please refer SMPTE2059-2 technical Operating Mode Settings document for details) The IP25G series monitor operating mode, the menu is 12) Reset to Default (please refer SMPTE2059-2 displayed as follows: technical document for details) Reset the PTP to default value.
  • Page 31 Version Information: display the NMOS version info of the corresponding channel. The default network IP address of the IP25G series monitor is 192.168.1.125. The default IP address of the Node Description: users can set the NMOS network RJ45 Port is also 192.168.1.125.
  • Page 32 Select Signal -> Output operation is as follows: Users can select 4K 12G-SDI or 4K 4x3G-SDI video 1) If the IP25G series monitor is set as 4K ST2110 IP format output signal. data receiving device, that is, ST2110 Decap 4K mode,...
  • Page 33 5) Select the PTP of the Genlock option and adjust the parameters of each items. Genlock-> PTP. The default value of the IP25G series monitor is 127. 6) Select the SFP 1 of the Network option and adjust the parameters of each item. Network->SFP 1.
  • Page 34 Management protocol of the IGMP V2/V3 version. Note: Users must to ensure the multicast address of the IP25G series monitor is the same as the multicast address of the network switch, if the IP25G series monitor operates under the IGMP V3 network multicast management protocol.
  • Page 35 12) Select the Upgrade of the System option and upload a file to upgrade the firmware. System->Upgrade. Note: please contact with Konvision or the authorized resellers for upgrading. 11) Select the Information of the System option and see the detail info of the device. System-> Information.
  • Page 36 User Address Postal Code Model. No Serial Number Warranty Date Purchase Date Replacement parts Replacement parts Item Contents of Reparation Remark name quantity Repairer Signature Service hotline User Signature www.konvision.com...