#(!.').' 4(% &2/.4
$)2%#4)/. ).$)#!4/2 "5,"3
Carefully read p. 97 (BULBS).
Position the vehicle on the centre stand,
see p. 56 (POSITIONING THE VEHICLE
ON THE STAND).
Unscrew and remove the screw (1).
a
CAUTION
While removing the protection screen,
proceed carefully in order not to break
the cog.
Remove the protection screen (2).
100
use and maintenance RST mille Futura
a
CAUTION
Upon reassembly, correctly position the
protection screen in its seat. Tighten
the screw (1) moderately and carefully,
to avoid damaging the protection
screen.
Press the bulb (3) slightly and rotate it
anticlockwise.
Extract the bulb (3) from its seat.
a
CAUTION
Insert the bulb in the bulb socket, mak-
ing the two bulb pins coincide with the
relevant guides on the socket.
Correctly install a new bulb of the same
type.
#(!.').' 4(% 2%!2 $)2%#4)/.
).$)#!4/2 "5,"3
For the removal of the rear direction indica-
tor bulbs, see p. 100 (CHANGING THE
REAR LIGHT BULB).
#(!.').' 4(% 2%!2 ,)'(4
"5,"
Carefully read p. 97 (BULBS).
The rear light contains:
– two parking light/stoplight bulb (4).
– two rear direction indicator bulbs (5).