APRILIA ATLANTIC 125 - MANUEL 2 Manual page 46

Table of Contents

Advertisement

WARNING
Inspect the brake pads before each ride.
This is a quick inspection procedure to
determine brake pads wear:
Place the vehicle on the centre stand.
Visually inspect the area between brake
disc and brake pads proceeding as
follows.
FRONT BRAKE CALIPERS
√ Check the pads of both calipers looking
from the bottom up at the front end.
use and maintenance Atlantic 125/250
46
C
REAR BRAKE CALIPER
√ Check both pads (C) looking from the
bottom up at the rear end.
WARNING
If brake pads were allowed to wear
d o w n u n t i l u n c o v e r i n g t h e m e t a l
substrate, metal-to-metal contact with
the brake disc would lead to rattle and
the brake calliper sparking. This will
result in loss of braking and brake disc
damage, causing a dangerous riding
condition.
1
When the lining material of even just one
of the brake pads is worn down to nearly
1.5 mm, have both brake pads changed.
√ Front brake pads (1).
√ Rear brake pads (2).
WARNING
Have the parts replaced at an aprilia
Official Dealer.
2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Atlantic 250Atlantic 125

Table of Contents