Summary: Any Ip Table; Summary: Bandwidth Management Monitor; Figure 7 Any Ip Table - ZyXEL Communications X550N - V3.60 User Manual

Chapter 3 Introducing the Web Configurator
Table 6 Screens Summary
LINK
System
Logs
Tools
Config Mode
Sys OP
Mode
Language

3.5.2 Summary: Any IP Table

This screen displays the IP address of each computer that is using the X550N via the any IP
feature. Any IP allows computers to access the Internet through the X550N without changing
their network settings when NAT is enabled. To access this screen, open the Status screen (see
Section 3.5 on page

Figure 7 Any IP Table

3.5.3 Summary: Bandwidth Management Monitor

Select the BW MGMT Monitor (Details...) hyperlink in Status screen. View the bandwidth
usage of the WAN configured bandwidth rules. This is also shown as bandwidth usage over
the bandwidth budget for each rule. The gray section of the bar represents the percentage of
unused bandwidth and the blue color represents the percentage of bandwidth in use.
44
TAB FUNCTION
General Use this screen to view and change administrative settings such as
system and domain names, password and inactivity timer.
Time Setting Use this screen to change your X550N's time and date.
View Log Use this screen to view the logs for the categories that you
selected.
Log Settings Use this screen to change your X550N's log settings.
Firmware Use this screen to upload firmware to your X550N.
Configuration Use this screen to backup and restore the configuration or reset
the factory defaults to your X550N.
Restart This screen allows you to reboot the X550N without turning the
power off.
Wake On Use this screen to remotely turn on a device on the network.
LAN
General This screen allows you to display or hide the advanced screens or
features.
General This screen allows you to select whether your device acts as a
Router or a Access Point.
This screen allows you to select the language you prefer.
39), and click (Details...) next to Any IP Table.
X550N Series User's Guide