Chapter 18 Remote Management
18.5 FTP Screen
You can use FTP (File Transfer Protocol) to upload and download the X550N's firmware and
configuration files. To use this feature, your computer must have an FTP client.
To change your X550N's FTP settings, click Management > Remote MGMT > FTP. The
screen appears as shown. Use this screen to specify which interfaces allow FTP access and
from which IP address the access can come.
Figure 128 Management > Remote MGMT > FTP
The following table describes the labels in this screen.
Table 82 Management > Remote MGMT > FTP
LABEL
Server Port
Server Access
Secured Client IP
Address
Apply
Reset
18.6 DNS Screen
Use DNS (Domain Name System) to map a domain name to its corresponding IP address and
vice versa. Refer to the chapter on Wizard Setup for background information.
To change your X550N's DNS settings, click Management > Remote MGMT > DNS. The
screen appears as shown.
212
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the X550N using this
service.
A secured client is a "trusted" computer that is allowed to communicate with the
X550N using this service.
Select All to allow any computer to access the X550N using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the X550N using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
X550N Series User's Guide