Table of Contents
Advertisement
Chapter 10 DHCP
Table 51 Network > DHCP > General
LABEL
Apply
Reset
10.3 DHCP Advanced Screen
This screen allows you to assign IP addresses on the LAN to specific individual computers
based on their MAC addresses. You can also use this screen to configure the DNS server
information that the X550N sends to the DHCP clients.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address
is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
To change your X550N's static DHCP settings, click Network > DHCP > Advanced. The
following screen displays.
Figure 87 Network > DHCP > Advanced
The following table describes the labels in this screen.
Table 52 Network > DHCP > Advanced
LABEL
Static DHCP Table
#
MAC Address
IP Address
134
DESCRIPTION
Click Apply to save your changes back to the X550N.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
This is the index number of the static IP table entry (row).
Type the MAC address (with colons) of a computer on your LAN.
Type the LAN IP address of a computer on your LAN.
X550N Series User's Guide
Advertisement
Table of Contents
Troubleshooting
