Figure 63 Network > Wireless Lan > General: Static Wep; Table 32 Network > Wireless Lan > General: Static Wep - ZyXEL Communications X550N - V3.60 User Manual

Your X550N allows you to configure up to four 64-bit or 128-bit WEP keys but only one key
can be enabled at any one time.
In order to configure and enable WEP encryption; click Network > Wireless LAN to display
the General screen. Select Static WEP from the Security Mode list.
Figure 63 Network > Wireless LAN > General: Static WEP
The following table describes the wireless LAN security labels in this screen.
Table 32 Network > Wireless LAN > General: Static WEP
LABEL
Passphrase
WEP
Encryption
Authentication
Method
ASCII
Hex
X550N Series User's Guide
DESCRIPTION
Enter a passphrase (password phrase) of up to 32 printable characters and click
Generate. The X550N automatically generates four different WEP keys and displays
them in the Key fields below.
Select 64-bit WEP or 128-bit WEP to enable data encryption.
This field is activated when you select 64-bit WEP or 128-bit WEP in the WEP
Encryption field.
Select Auto or Shared Key from the drop-down list box.
Select this option in order to enter ASCII characters as WEP key.
Select this option in order to enter hexadecimal characters as a WEP key.
The preceding "0x", that identifies a hexadecimal key, is entered automatically.
Chapter 7 Wireless LAN
97