Table of Contents
Advertisement
Figure 67 Network > Wireless LAN > Advanced
The following table describes the labels in this screen.
Table 36 Network > Wireless LAN > Advanced
LABEL
Roaming Configuration
Enable
Roaming
Wireless Advanced Setup
RTS/CTS
Threshold
Enable Intra-
BSS Traffic
Apply
Reset
7.8 Quality of Service (QoS) Screen
The QoS screen allows you to automatically give a service (such as e-mail, VoIP or FTP) a
priority level.
Click Network > Wireless LAN > QoS. The following screen appears.
X550N Series User's Guide
DESCRIPTION
Select this option if your network environment has multiple APs and you want your
wireless device to be able to access the network as you move between wireless
networks.
Data with its frame size larger than this value will perform the RTS (Request To
Send)/CTS (Clear To Send) handshake.
Enter a value between 0 and 2432.
A Basic Service Set (BSS) exists when all communications between wireless clients
or between a wireless client and a wired network client go through one access point
(AP).
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is
enabled, wireless client A and B can access the wired network and communicate
with each other. When Intra-BSS is disabled, wireless client A and B can still access
the wired network but cannot communicate with each other.
Click Apply to save your changes back to the X550N.
Click Reset to reload the previous configuration for this screen.
Chapter 7 Wireless LAN
103
Advertisement
Table of Contents
Troubleshooting
