Figure 10Internet Connection With Pppoa; Table 7Internet Connection With Enet Encap - ZyXEL Communications P-660R-Tx v2 Series User Manual

Adsl2+ access router
Hide thumbs Also See for P-660R-Tx v2 Series:
Table of Contents

Advertisement

P-660R-Tx v2 Series User's Guide
The following table describes the labels in this screen.
Table 7 Internet Connection with ENET ENCAP
LABEL
IP Address
Subnet Mask
ENET ENCAP
Gateway
Network
Address
Translation
Back
Next
Figure 10 Internet Connection with PPPoA
46
DESCRIPTION
A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not
fixed; the ISP assigns you a different one each time you connect to the Internet.
Select Obtain an IP Address Automatically if you have a dynamic IP address;
otherwise select Static IP Address and type your ISP assigned IP address in the IP
Address text box below.
Enter a subnet mask in dotted decimal notation.
Refer to
Appendix C on page 149
subnetting.
You must specify a gateway IP address (supplied by your ISP) when you use ENET
ENCAP in the Encapsulation field in the previous screen.
Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the NAT
chapter for more details.
Click Back to go back to the first wizard screen.
Click Next to continue to the next wizard screen.
to calculate a subnet mask If you are implementing
Chapter 3 Wizard Setup

Advertisement

Table of Contents
loading

This manual is also suitable for:

P-660r-t1 v2P-660r-t2 v2P-660r-t3 v2

Table of Contents