Configuration Mode; Chapter 10 Configuration Mode; Figure 54 Maintenance > Config Mode > General; Table 29 Maintenance > Config Mode > General - ZyXEL Communications PLA-450 User Manual

C
H A P T E R
Click Maintenance > Config Mode to open the following screen. This screen allows you to
hide or display the advanced screens of some features or the advanced features, such as MAC
filter. Basic is selected by default and you cannot see the advanced screens or features. If you
want to view and configure all screens including the advanced ones, select Advanced and
click Apply.
Figure 54 Maintenance > Config Mode > General
The following table describes the labels in the screen.
Table 29 Maintenance > Config Mode > General
LABEL

Configuration Mode

Basic
Advanced
Apply
Reset
The following table lists the screens that you can view and configure only when you select
Advanced.

Table 30 Advanced Configuration Options

CATEGORY
Network
Maintenance
PLA-450 User's Guide
Configuration Mode
DESCRIPTION
Select Basic mode to enable or disable features and to monitor the status of your
device.
Select Advanced mode to set advanced settings.
Click on this to set the mode.
Click on this to reset your selection to the default (Advanced).
LINK
Wireless LAN
Logs
10
TAB
MAC Filter
Advanced
QoS
Log Settings
95