Figure 44 Maintenance > Logs > Log Settings; Table 26 Maintenance > Logs > Log Settings - ZyXEL Communications PLA-450 User Manual

Figure 44 Maintenance > Logs > Log Settings
The following table describes the labels in this screen.
Table 26 Maintenance > Logs > Log Settings
LABEL
E-mail Log Settings
Mail Server
Mail Subject
Send Log To
Send Alerts To
SMTP
Authentication
PLA-450 User's Guide
DESCRIPTION
Enter the server name or the IP address of the mail server for the e-mail
addresses specified below. If this field is left blank, logs and alert messages will
not be sent via E-mail.
Type a title that you want to be in the subject line of the log e-mail message that
the ZyXEL Device sends. Not all ZyXEL Device models have this field.
The ZyXEL Device sends logs to the e-mail address specified in this field. If this
field is left blank, the ZyXEL Device does not send logs via e-mail.
Alerts are real-time notifications that are sent as soon as an event, such as a
DoS attack, system error, or forbidden web access attempt occurs. Enter the E-
mail address where the alert messages will be sent. Alerts include system
errors, attacks and attempted access to blocked web sites. If this field is left
blank, alert messages will not be sent via E-mail.
SMTP (Simple Mail Transfer Protocol) is the message-exchange standard for
the Internet. SMTP enables you to move messages from one e-mail server to
another.
Select the check box to activate SMTP authentication. If mail server
authentication is needed but this feature is disabled, you will not receive the e-
mail logs.
Chapter 8 Logs
87