Wpa/Wpa2; Figure 30 Network > Wireless Lan > General: Wpa/Wpa2 - ZyXEL Communications PLA-450 User Manual

Chapter 4 Wireless LAN
Table 13 Network > Wireless LAN > General: WPA-PSK/WPA2-PSK
LABEL
Group Key
Update Timer
Apply
Reset

4.5.4 WPA/WPA2

Click Network > Wireless LAN to display the General screen. Select WPA or WPA2 from
the Security Mode list.
Figure 30 Network > Wireless LAN > General: WPA/WPA2
58
DESCRIPTION
The Group Key Update Timer is the rate at which the AP (if using WPA-PSK/
WPA2-PSK key management) or RADIUS server (if using WPA/WPA2 key
management) sends a new group key out to all clients. The re-keying process is
the WPA/WPA2 equivalent of automatically changing the WEP key for an AP and
all stations in a WLAN on a periodic basis. Setting of the Group Key Update
Timer is also supported in WPA-PSK/WPA2-PSK mode. The default is 1800
seconds (30 minutes).
Click Apply to save your changes back to the ZyXEL Device.
Click Reset to reload the previous configuration for this screen.
PLA-450 User's Guide