ZyXEL Communications PLA-450 User Manual page 69

Table 20 Network > LAN > IP
LABEL
User Defined LAN
IP
IP Address
IP Subnet Mask
Gateway IP
Address
Apply
Reset
PLA-450 User's Guide
DESCRIPTION
Select this option to use a specific (fixed) IP address.
Enter the ZyXEL Device's IP address in dotted decimal notation. 192.168.1.2 is
the factory default.
Enter the IP subnet mask in this field if you have a specific for the ZyXEL Device
to use.
The subnet mask specifies the network number portion of an IP address. Your
ZyXEL Device automatically calculates the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the
subnet mask computed by the ZyXEL Device.
Enter a gateway IP address in this field if you have a specific for the ZyXEL
Device to use.
Click Apply to save your changes back to the ZyXEL Device.
Click Reset to begin configuring this screen afresh.
Chapter 5 LAN
69