ZyXEL Communications PLA-450 User Manual page 107

Table 33 Standards Supported (continued)
STANDARD
IEEE 802.11
IEEE 802.11b
IEEE 802.11g
IEEE 802.11d
IEEE 802.1x
IEEE 802.11e QoS
Microsoft PPTP
Wall-mounting Instructions
Do the following to hang your ZyXEL Device on a wall.
See Table 31 on page 105
place them.
1 Locate a high position on a wall that is free of obstructions. Use a sturdy wall.
2 Drill two holes for the screws. Make sure the distance between the centers of the holes
matches what is listed in the product specifications appendix.
Be careful to avoid damaging pipes or cables located inside the wall when
drilling holes for the screws.
3 Do not screw the screws all the way into the wall. Leave a small gap of about 0.5 cm
between the heads of the screws and the wall.
4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of
the ZyXEL Device with the connection cables.
5 Align the holes on the back of the ZyXEL Device with the screws on the wall. Hang the
ZyXEL Device on the screws.
PLA-450 User's Guide
Appendix A Product Specifications and Wall-Mounting Instructions
DESCRIPTION
Also known by the brand Wi-Fi, denotes a set of Wireless LAN/WLAN
standards developed by working group 11 of the IEEE LAN/MAN
Standards Committee (IEEE 802).
Uses the 2.4 gigahertz (GHz) band
Uses the 2.4 gigahertz (GHz) band
Standard for Local and Metropolitan Area Networks: Media Access
Control (MAC) Bridges
Port Based Network Access Control.
IEEE 802.11 e Wireless LAN for Quality of Service
MS PPTP (Microsoft's implementation of Point to Point Tunneling
Protocol)
for the size of screws to use and how far apart to
107