Setup Information - ZyXEL Communications PLA-450 User Manual

Homeplug av to wlan ap/bridge
Hide thumbs Also See for PLA-450:
Table of Contents

Advertisement

Chapter 4 Wireless LAN
Like radio stations or television channels, each wireless network uses a specific channel,
or frequency, to send and receive information.
• Every wireless client in the same wireless network must use security compatible with the
AP.
Security stops unauthorized devices from using the wireless network. It can also protect
the information that is sent in the wireless network.
Requirements
To add a wireless LAN to your existing network, make sure you have the following:
1 an access point (AP) or a router with the wireless feature
2 at least one wireless network card/adapter which varies according to your computer.
• If you have a desktop, use either a wireless USB adapter or a wireless PCI adapter.
• If you have a laptop, use either a wireless USB adapter or a wireless CardBus card.
3 a RADIUS server only if you want to use WPA or WPA2
To have two or more computers communicate with each other wirelessly without an AP or
wireless router, make sure you have the following:
1 two or more wireless network cards/adapters which vary according to your computers.
• If you have a desktop, use either a wireless USB adapter or a wireless PCI adapter.
• If you have a laptop, use either a wireless USB adapter or a wireless CardBus card.

Setup Information

To set up your wireless network using an AP or wireless router, make sure your AP or wireless
router and wireless network card(s)/adapter(s) use the same following settings:
• SSID:_____________________
• Channel: _________
• Network type of a wireless network card/adapter: Infrastructure
• wireless standard: IEEE 802.11b, g, or b/g
• Security:
( ) None
( ) WEP (64 bit or 128 bit key) (ASCII or Hex):________________
( ) WPA-PSK (TKIP):_______________
( ) WPA (TKIP)
( ) WPA2-PSK (AES):______________
( ) WPA2 (AES)
• Preamble type (if available): auto, short or long
To set up your wireless network without an AP or wireless router, make sure wireless network
cards/adapters use the same following settings:
• Network type: Ad-Hoc
• SSID:_____________________
• Channel: _________________
• wireless standard: IEEE 802.11b, g, or b/g
48
PLA-450 User's Guide

Advertisement

Table of Contents
loading

Table of Contents