Security: Wpa2-Psk, Wpa2-Psk-Mix - ZyXEL Communications 100-NH User Manual

Table 19 Security: WPA2 for Wireless Client (continued)
LABEL
Security Mode
Rekey Option
Reauthentication
Time
Enable Group-key
Update
Apply
Cancel

6.6.3 Security: WPA2-PSK, WPA2-PSK-MIX

Use this screen to employ WPA2-PSK or WPA2-PSK-MIX as the security mode of your NWA. Select
WPA2-PSK or WPA2-PSK-MIX in the Security Mode field to display the following screen.
Figure 33 Security: WPA2-PSK or WPA2-PSK-MIX
The following table describes the labels not previously discussed
Table 20 Security: WPA2-PSK or WPA2-PSK-MIX
LABEL
Profile Name
Security Mode
Pre-Shared Key
NWA1000 Series User's Guide
DESCRIPTION
Choose the same security mode used by the AP.
Specify how often wireless stations have to resend user names and passwords in order to
stay connected.
Enter a time interval between 0 and 3600 seconds. Enter "0" to turn reauthentication off.
If wireless station authentication is done using a RADIUS server, the reauthentication timer
on the RADIUS server has priority.
requires a connected wireless client to reauthenticate itself to the server again.
Group Key Timer is the rate at which the RADIUS server sends a new group key out to all
clients. Click the check box to enable the Group Key Update and type a number between
100 and 3600 for the time rate.
Click Apply to save your changes.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
This is the name that identifying this profile.
Choose WPA2-PSK or WPA2-PSK-MIX in this field.
Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including spaces
and symbols).
Enter how often the external authentication server
Chapter 6 Wireless LAN
77