Security: Wpa, Wpa2, Wpa2-Mix - ZyXEL Communications NWA1120 Series User Manual

Table 17 Security: WEP (continued)
LABEL
Key 1 to
Key 4
Back
Apply
Cancel

6.6.2 Security: WPA, WPA2, WPA2-MIX

This screen varies depending on the operating mode you select in the Wireless LAN > Wireless
Settings screen.
6.6.2.1 Access Point
Use this screen to employ WPA or WPA2 as the security mode for your NWA that is in root AP,
MBSSID or repeater operating mode. Select WPA, WPA2 or WPA2-MIX in the Security Mode
field to display the following screen.
Figure 31 Security: WPA/WPA2 for Access Point
The following table describes the labels in this screen.
Table 18 Security: WPA/WPA2 for Access Point
LABEL
Security Settings
Profile Name
Security Mode
Rekey Options
NWA1120 Series User's Guide
DESCRIPTION
The WEP keys are used to encrypt data. Both the NWA and the wireless stations must use
the same WEP key for data transmission.
If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal
characters ("0-9", "A-F").
If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal characters
("0-9", "A-F").
You can configure up to four keys, but only one key can be activated at any one time.
Click Back to return to the previous screen.
Click Apply to save your changes.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
This is the name that identifying this profile.
Choose WPA, WPA2 or WPA-MIX in this field.
Chapter 6 Wireless LAN
79