Dell Ink Management System - Dell 964 Owner's Manual

To launch MCM:
Insert a memory card into the memory card slot or a USB key into the PictBridge port on
1
the front of the printer.
After the card is read, the printer automatically switches to Photo mode.
Use the up or down Arrow buttons
2
and then press Select
You can also launch MCM from your computer by clicking Start
Programs Dell Printers
Manager.
For more information on using MCM, see "Printing Photos From a Memory Card" on page 32.

Dell Ink Management System

Each time you print a job, a printing progress screen appears, which shows the progress of the
print job as well as the amount of ink remaining and the approximate number of pages
remaining in the cartridge. The page counter is hidden during the first 50 pages of cartridge use,
until printing habits are learned and a more accurate count can be given. The number of pages
remaining changes as a result of the type of print jobs the printer completes.
When your ink cartridge levels are low, a Low Ink Warning appears on your screen when you try
to print. This warning is displayed every time you print until you install a new ink cartridge. For
more information on replacing ink cartridges, see "Replacing Ink Cartridges" on page 83.
When one or both of your ink cartridges are empty, the Reserve Tank window appears on your
screen when you try to print. If you continue printing, the print job may not print as you expect.
to scroll to Save Photos to Computer,
.
Dell Photo AIO Printer 964
Programs or All
Activate Memory Card
Understanding the Software
79