Scanning To Your Computer Over A Network - Dell 964 Owner's Manual

Scanning to Your Computer Over a Network

Make sure your computer is attached to the network.
1
NOTE: Dell printers can only be attached to a network using a Dell Network Adapter (sold
separately).
Make sure your computer and printer are on.
2
Load your original document. For help, see "Load an Original Document Into the ADF" on
3
page 24 or "Placing Your Original Document on the Scanner Glass" on page 25.
From the main menu, use the up and down Arrow buttons
4
press Select .
The printer automatically detects if it is connected to a network. If it is connected to a
network, the Host Selection screen appears. If it is not connected to a network, the Scan
Mode menu appears.
From the Host Selection Screen, choose the computer to which you want to send the
5
document, and press Select
Enter the four-digit PIN number specified for the host computer.
6
NOTE: This can be found in the upper right corner of the All-In-One Main Page. For help, see "Using
the Dell All-In-One Center" on page 73. The PIN is not required by default; it is only requested if the
PIN has been set.
Press Select .
7
The Scan Mode menu appears.
.
to scroll to Scan, and
Scanning
45