Neuation iFUGE M08 Product User Manual

gentle guidance into the groove on the rotor
adapter .
11. OPERATION
To operate the mini centrifuge, the below steps should be followed:
1. Connect the power adaptor & Switch 'On' from the front side.
2. Load the rotor symmetrically to avoid accidents and damage to the
centrifuge.
3. Close the lid & flip ON the front switch to start centrifugation.
4. Once the centrifugation is completed, turn the front switch to "Off" to
gradually stop the rotor.
5. After the rotor has stopped, press the lid release button and open the lid with
your thumb in front and fingers on the top - simply lift the lid back on the
hinge.
6. If you want to stop the centrifuge quickly, push the lid release button and the
rotor will stop within a few seconds.
In the following pages the routine centrifuge operation procedures are
explained in brief.
12. MAINTENANCE AND CLEANING
This personal centrifuge and its rotor should be cleaned periodically & ensure
that while cleaning the unit is not plugged in to the main power supply. To clean
the personal Centrifuge, use a damp cloth and a mild, noncorrosive detergent.
Do not immerse the centrifuge in liquid or pour liquids over it. Excessive
amounts of liquid should be avoided, Liquid should not come into contact with
the motor. After cleaning, ensure all parts are dried thoroughly before
attempting to operate the unit.
If a spill of infectious materials occur within the rotor or rotor chamber, the unit
should be disinfected. This should be performed by qualified personnel with
proper protective equipment. Do not use any cleaning or decontamination
methods except those recommended by the manufacturer, check with the
manufacturer that the proposed method will not damage the equipment.
13. WARRANTY STATEMENT
This product is warranted to be free from defects in material and workmanship.
Your product will be duly repaired upon prompt notification in compliance with
the following conditions:
This warranty is valid only if the product is used for its intended purpose and
within the guidelines specified in this instruction manual. This warranty does not
cover damage caused by accident, neglect, misuse, improper service, natural
forces or other causes not arising from defects in original material or
workmanship. This warranty does not cover any incidental or consequential
damages, commercial loss or any other damages from the use of this product.
The warranty is invalidated by any non-factory modification, which will
immediately terminate all liabilities on us for the products or damages caused by
its use. The customer shall be responsible for the product or use of products as
well as any supervision required for safety. If requested the products must be
returned to the distributor in well packed and insured manner and all shipping
charges must be paid.
Note: Some states do not allow limitation on the length of implied warranties or
the exclusion or limitation of incidental or consequential damages. This warranty
gives you specific legal rights. This warranty is given expressly in lieu of all other
warranties, expressed or implied.
4
The purchaser agrees that there is no warranty of merchantability or of fitness for
any intended purpose and that there are no other remedies or warranties,
expressed or implied, which extend beyond the description on the face of the
agreement. This warranty is only applicable to the original purchaser.
Products received without proper authorization will not be processed for
warranty or service. All items returned for service should be sent with postage
prepaid in the original packaging or other suitable packaging, padded to avoid
damage. We will not be responsible for damage incurred by improper
packaging.
Note: This warranty is valid only if the warranty is registered with the supplier
within 30 days from the date of purchase.
For details regarding the warranty period, please refer to the warranty card
provided with the product.
For your reference, make a note of the serial number, date of purchase and supplier here.
Purchase Date
Serial No.
Supplier
14. PRODUCT DISPOSAL
In case the product is to be disposed of, the relevant legal regulations are to be
observed.
Information on the disposal of electrical and electronic devices in the European
Community
The disposal of electrical devices is regulated within the European Community
by national regulations based on EU Directive 2012/19/EU on waste electrical
and electronic equipment (WEEE). According to these regulations, any devices
supplied after 13.06.05 in the business to business sphere, to which this product
is assigned, may no longer be disposed off in municipal or domestic waste. They
are marked with the following symbol to indicate this.
As disposal regulations within the EU may vary from country to country, please
contact your supplier if necessary.
Accumax Lab Devices Private Limited
Plot No. 15, 16 & 32 GIDC Electronic Park SEZ, Sector 26, Gandhinagar, Gujarat, India - 382026.
Website: www.accumaxlab.com
iFUGE M08
PRODUCT USER MANUAL
0108-00-0000-02-003-R3