Before Calling Service Personnel - LENCO DVP-705 Instruction Manual

Before Calling Service Personnel

Check the following guide for the possible cause of a problem before contacting service.
Symptom
No power
The power is on, but
the DVD player does
not work.
No picture on the LCD
or TV(including video from
another unit).
Symptoms and Correction
Cause
The power cord is disconnected.
The battery is discharged.
No disc is inserted.
The video cable is not connected securely.
Check that Brightness control is set to low.
The TV is not set to receive DVD signal
output.
The connected TV power is turned off.
Plug the power cord into the wall outlet
securely.
Recharge the battery.
Insert a disc.
Connect the video cable into the jacks
securely.
Adjust the brightness.
Select the appropriate video input mode on
the TV so the picture from the DVD player
appears on the TV screen.
Turn on the TV.
31
Correction