LENCO DVP-705 Instruction Manual page 10

Hide thumbs Also See for DVP-705:
Table of Contents

Advertisement

Identification of Controls
Insert the battery (Lithium battery)
Do not expose the remote control sensor to bright light.
Do not place obstacles between the remote control sensor
and the remote control.
Replacing the button-type battery
The battery normally lasts for about a year. Replace the battery if
the remote control fails to operate the unit when used within the
operation range.
Button-type battery (Lithium battery)
1.
Pinch the battery holder clip together then pull the tab to
remote the battery holder.
2.
Insert the battery with the + facing in the same direction as
the + on the battery holder.
3.
Replace the battery holder with battery into the remote
control unit making sure that it is fully inserted.
Replace remote control unit battery with 3V micro lithium
cells.
Dispose of battery safety in accordance with local laws. Do
not dispose of in fire.
Warning : The battery used in this device may present a fire or
chemical
burn
hazard
disassemble, incinerate, or heat about 100 C (212 F)
Use of another battery may present a risk of fire or explosion.
Dispose of used batteries. Keep batteries away from children. Do
not disassemble or dispose of fire
10
if
mistreated.
Do
not
recharge,

Advertisement

Table of Contents
loading

Table of Contents