Playing A Disc; Basic Playback - LENCO DVP-705 Instruction Manual

Playing a Disc

Basic Playback

Prepare the power supply.
1. Open the outer cover and slide the POWER ON/OFF
switch to ON.
2. Press OPEN/PUSH to open the disc lid and insert a
disc with the side you want to play label up. Close the
disc lid by hand.
If the disc is placed in upside down (and it is a
single-sided disc), NO Disc or Bad DISC appear
on the TV screen.
After playing back all of the chapters in the title, the
DVD player automatically stops and to the menu
screen.
3. Press PLAY to start Play.(Some disc may play
automatically.)
4. Adjust the volume.
Place a disc with the playback side down on the spindle,
and push gently on the center of the disc so it goes into
position.
When a menu screen appears on the TV screen.
In case of interactive DVDs with control, a menu screen appears
on the TV screen.
Press / / / and press ENTER, or press the numeric
button(s), to select the desired item.
Play of the selected item now begins.
For further information, also refer to the jacket or case of the disc
you are playing.
After operation
When the unit is not in use, remove the disc and slide POWER
ON/OFF to OFF to turn off the DVD player.
When appear on the TV screen while a button is
pressed, it means that this function is not available on the
disc you are playing.
Depending on the DVD disc, some operations may be
different or restricted. Refer to the jacket or case of the disc
you are playing.
14
Example of interactive
DVD On-screen Menu