Advertisement
Quick Links
Advertisement
Related Manuals for TRI tool 601SBCM
Summary of Contents for TRI tool 601SBCM
- Page 1 Operation Manual...
- Page 2 ABOUT TRI TOOL TECHNOLOGIES At Tri Tool, we are committed to your success through relentless innovation and powerful partnership. We insist on developing tools and equipment that exceed your expectations of performance, precision, safety, and durability. As a full-service engineering firm, we are here to support you every step of the way.
- Page 3 TABLE OF CONTENTS TRI TOOL INC. WARRANTY TOOL BIT RESHARPENING POLICY ABOUT THE MANUAL SAFETY PRECAUTIONS GENERAL DESCRIPTION ILLUSTRATED PARTS BREAKDOWN...
- Page 4 TRI TOOL INC. TRI TOOL Inc. Warranty LIMITED WARRANTY: All products manufactured by Seller are warranted to be free from defects in materials and workmanship under normal use. The period of this warranty shall be three years from the date of shipment for all products, except for welding and Non- Standard Products which shall be one year from the date of shipment.
- Page 5 Motor Assembly, Cordless, 18VDC Buyer’s notice of a defective Goods must identify the specific Goods affected, and the nature of the defect. It is required when returning the defective Goods, that it is suitably packed, fully insured, and transportation and insurance prepaid in accordance with instructions issued by Seller.
- Page 6 The instructions and descriptions in this manual were accurate when the manual was written. However, the information in the manual is subject to change without notice. Check for updated information before you start any job. The TRI TOOL Inc. web site has the most current information.
- Page 7 Appropriate PPE and tools required when working on this equipment. SHOCK HAZARD READ MANUAL: Read manual before use, refer to manual for TRI TOOL Inc. machine being used. READ MANUAL DISCONNECT FROM POWER: Disconnect main plug from electrical outlet before performing all maintenance.
- Page 8 TRI TOOL INC. 2. SAFETY PRECAUTIONS In General Use standard safety equipment such as: hard hats, safety shoes, safety harnesses, protective clothes, and other safety devices when appropriate. Operate this tool only in accordance with specific operating instructions. WARNING: Do not override the dead-man switch on the power unit. Locking down, obstructing, or in any way defeating the dead-man switch on the power drive unit may result in serious injury.
- Page 9 Before you start operating the equipment, do no-load tests and feed function checks. Tool Use Use the right tool and tool bit for the job. Contact TRI TOOL Inc. to help with your application. Keep the tool bits fully engaged in the tool bit holders. Loose bits are sharp and can cause cuts or punctures.
- Page 10 TRI TOOL INC. 3. GENERAL DESCRIPTION Use information in Operation Manuals 92-1509 and 92-1208 in conjunction with this manual. 92-1845 Rev. 240715...
- Page 11 Motor Assembly, Cordless, 18VDC 4. ILLUSTRATED PARTS BREAKDOWN MOTOR ASSEMBLY, CORDLESS, 18VDC (P/N 58-0347) Parts List, Motor Assembly. Cordless, 18VDC (P/N 58-0347) Item Part Description 20-1451 SHAFT, DRIVE 27-1569 ADAPTER, BAYONET 33-0040 SCREW, CAP, 1/4-20 X 3/4 40-0143 SPRING 58-0317 MOTOR, CORDLESS, 18V, METABO, 120V MOD CW 92-1845 Rev.
- Page 12 • Disconnect power sources before servicing or moving the equipment. • Remove all loose articles of clothing and jewelry before operating the equipment. Be Safety Conscious! 3041 Sunrise Blvd. Rancho Cordova, CA 95742 +1(916) 288-6100 • +1(800) 345-5015 www.tritool.com ©Copyright Tri Tool Inc. PN 81-0542 (04-21)
Need help?
Do you have a question about the 601SBCM and is the answer not in the manual?
Questions and answers