Related Manuals for TRI tool 206B-SM
Summary of Contents for TRI tool 206B-SM
-
Page 1: Table Of Contents
TABLE OF CONTENTS CUSTOMER MESSAGE Inside Front Cover SAFETY PRECAUTIONS GENERAL DESCRIPTION MAINTENANCE SLEEVE MANDREL KIT RANGE ILLUSTRATED PARTS BREAKDOWN TOOL BIT RESHARPENING POLICY Inside Back Cover WARRANTY INFORMATION Inside Back Cover... - Page 2 Copyright 2005 Proprietary property of TRI TOOL Inc. No reproduction, use, or duplication of the information shown hereon is permitted without the express written consent of TRI TOOL Inc.
-
Page 3: Safety Precautions
Model 206B-SM, Sleeve Mandrels SAFETY PRECAUTIONS IN GENERAL When using rotating head cutting equipment, basic safety precautions should always be followed to reduce the risk of personal injury. Operate this tool only in accordance with specific operating instructions. Do not override the deadman switch on the power unit. Locking down, ob-... - Page 4 TRI TOOL INC. TOOL CARE Maintain tools with care. Keep tools in good operating condition. Sharp tool bits perform better and safer than dull tool bits. Well maintained tools function properly when needed. Check for damaged parts. If a tool has malfunctioned, been dropped or hit, it must be checked for damage.
- Page 5 Model 206B-SM, Sleeve Mandrels Disconnect power supply during setup and maintenance. Use all ‘Stop’ or Shut off’ features available when changing or adjusting tool bits, maintaining the tool, or when the tool is not in use. Remove adjusting keys and wrenches before applying power to the equipment.
-
Page 6: General Description
TRI TOOL INC. GENERAL DESCRIPTION The Sleeve Mandrels have been designed to expand the versatility of the Model 206B BEVELMASTER These Mandrels, when used in conjunction with the Model 206B, allow machining of thin wall pipe and tube. 92-0317 : Orig. 910701... -
Page 7: Maintenance
Wipe the unit down and spray with a rest preventative under severe humidity conditions. Visually inspect for loose screws, missing bolts, or damage due to impact. Contact TRI TOOL Inc. if major repair is required. Tighten or replace screws or other parts as required. 92-0317 : Orig. 910701... -
Page 8: Sleeve Mandrel Kit Range
TRI TOOL INC. SLEEVE MANDREL KIT RANGE ID MOUNTING RANGE Head Sleeve ID Range Assy Assy 21-0295 46-0236 2.00" (50.8 mm) 2.30" (58.4 mm) 46-0237 2.44" (62.0 mm) 2.74" (69.6 mm) 21-0296 46-0238 3.20" (81.3 mm) 3.41" (86.6 mm) 21-0297 46-0239 3.70"... -
Page 9: Illustrated Parts Breakdown
Model 206B-SM, Sleeve Mandrels ILLUSTRATED PARTS BREAKDOWN SLEEVE MANDRELS Parts List, Mandrel Assy, #1 Sleeve (P/N 06-0343) Item Part Description 12-0112 MANDREL, SUB-ASSY 11-0063 ROD ASSY, DRAW 13-0319 MANDREL 33-1527 SCREW, SET, 1/4-20 X 1/4, HDOG 21-0295 HEAD ASSY, #1... - Page 10 TRI TOOL INC. Parts List, Mandrel Assy, #2 Sleeve (P/N 06-0344) Item Part Description 12-0112 MANDREL, SUB-ASSY 11-0063 ROD ASSY, DRAW 13-0319 MANDREL 33-1527 SCREW, SET, 1/4-20 X 1/4, HDOG 21-0295 HEAD ASSY, #1 21-0301 HEAD, #1 32-0015 PIN, ROLL, 3/32 DIA X 5/16...
- Page 11 Model 206B-SM, Sleeve Mandrels SLEEVE MANDREL ASSEMBLY Parts List, Mandrel Assy, #4 Sleeve (P/N 06-0346) Item Part Description 12-0112 MANDREL, SUB-ASSY 11-0063 ROD ASSY, DRAW 13-0319 MANDREL 33-1527 SCREW, SET, 1/4-20 X 1/4, HDOG 21-0297 HEAD ASSY, #3 21-0303 HEAD, #3...
- Page 12 TRI TOOL INC. Parts List, Mandrel Assy, #5 Sleeve (P/N 06-0347) Item Part Description 12-0112 MANDREL, SUB-ASSY 11-0063 ROD ASSY, DRAW 13-0319 MANDREL 33-1527 SCREW, SET, 1/4-20 X 1/4, HDOG 21-0298 HEAD ASSY, #4 21-0304 HEAD, #4 33-0074 SCREW, CAP, 3/8-16 X 1 3/4 34-0233 WASHER, NYLON, 5/8"...
- Page 13 Model 206B-SM, Sleeve Mandrels Parts List, Mandrel Assy, #7 Sleeve (P/N 06-0349) Item Part Description 12-0112 MANDREL, SUB-ASSY 11-0063 ROD ASSY, DRAW 13-0319 MANDREL 33-1527 SCREW, SET, 1/4-20 X 1/4, HDOG 21-0300 HEAD ASSY, #6 21-0306 HEAD, #6 33-0074 SCREW, CAP, 3/8-16 X 1 3/4 34-0233 WASHER, NYLON, 5/8"...
Need help?
Do you have a question about the 206B-SM and is the answer not in the manual?
Questions and answers