AKG IVM 1 User Instructions page 25

>S2< _
8 A c
█ █
EAR SND AMB STEREO RFCH
IVA
Press or to enter letters, numerals, or other characters.
steps UP through the characters,
tinuously through the characters, hold down
hold .
2. Press or as many times or hold down as long as neces-
sary to place the desired character above the cursor. Press
SELECT and enter the next character, and so on. You may enter
up to 13 characters (example: "Musikverein").
>S2< Musikverei_
8 A c
█ █
EAR SND AMB STEREO RFCH
IVA
Note: You can place the dash at 8 different vertical positions.
This allows you to draw a rough frequency response
curve.
3. Having completed the name,1 press SELECT as many times as
necessary to move the cursor beyond the end of the line and
call up this display:
Save S2: >YES<
8 A c
█ █
EAR SND AMB STEREO RFCH
IVA
4. If you wish to save your Setup in memory press SELECT.
The display will indicate the name of the Setup you just saved:
S2 Musikverein
8 A c
█ █
EAR SND AMB STEREO RFCH
IVA
5. If you do NOT wish to save the Setup press
change to "SAVE S2: >NO<") and SELECT.
The display will revert to the main menu.
Recalling Setups
The first line of the main menu indicates either the current Sound
or the current Setup.
To step through the Sounds and Setups press
is followed by the first stored Setup, the last Setup by "Sound A"
again.
Important: If the transmission channel number above "RFCH"
starts blinking, the transmission channel stored with
the selected Setup is not identical to the previously
selected transmission channel. Therefore, check that
the transmission channel selected on the receiver is
identical to the transmitter channel. If it is not, select
the same channel on both the transmitter and the
receiver.
Note: You can change any parameter of the currently active
Setup from the appropriate menu (e.g., "Sound",
"Panorama", etc.). The lower display line indicates these
24
O O
06
O
LOCK
MENU SELECT
DOWN. To scroll up con-
. To scroll down,
06
O
LOCK
MENU SELECT
O O
06
O
LOCK
MENU SELECT
O O
06
O
LOCK
MENU SELECT
(the display will
or . "Sound H"
changes. All changes will be automatically deleted on dis-
connecting the transmitter from power.
To keep the changes, save the modified Setup either under
the same name or as a new Setup with a different name.
Deleting Setups
1. Press MENU.
2. Press or as many times as necessary to call up this
display:
Menu: Save Setup
8 A c
█ █
EAR SND AMB STEREO RFCH
IVA
3. Press SELECT.
The display will indicate the name of the first stored Setup (e.g.,
"Wembley").
Set: >1< Wembley
8 B c
█ █
EAR SND AMB STEREO RFCH
IVA
4. Press to select the Setup you wish to delete (e.g., "Set: >2<
Musikverein"):
Set: >2< Musikverein
8 A c
█ █
EAR SND AMB STEREO RFCH
IVA
5. To delete the selected Setup, e.g., S2, press SELECT as many
times as necessary to move the cursor to the end of the line and
call up the command "Save S2: >YES<".
6. Press twice.
The command "Save S2: >DELETE<" will appear in the
display.
7. Press SELECT.
The Setup will be deleted and the display will revert to the main
menu.
7.5.14. Level
To check the input signal level call up the "Level" menu:
1. Press MENU.
2. Press or as many times as necessary to call up this
display:
Menu: Level
8 A c
█ █
EAR SND AMB STEREO RFCH
IVA
3. Press SELECT.
The input levels in the left channel (L) and right channel (R) are
displayed by horizontal rectangles in sync with the front panel
IN LEVEL LEDs. A vertical line in each channel marks the
threshold of the integrated limiter.
I
I
EAR SND AMB STEREO RFCH
IVA
06
LOCK
MENU
O
06
LOCK
O
MENU
O
06
O
LOCK
MENU
06
LOCK
MENU
O
L
R
O
LOCK
MENU
O
SELECT
O
SELECT
O
SELECT
O
SELECT
O
SELECT