ST Nucleo-64 STM32WL3 Series User Manual page 21

7.9
ARDUINO
7.9.1 Description
On the bottom side of the board, there is an ARDUINO
connectors (CN5, CN6, CN7, and CN8). Most shields designed for ARDUINO
flexibility in small form factor applications.
7.9.2 ®
ARDUINO interface and pinout
Figure 13 shows the position of the ARDUINO
The pinout shown in
STM32, refer to
ARDUINO
®
ARDUINO Analog 0-5 (CN7)
UM3418 - Rev 1
®
connectors
Figure 13 corresponds to standard ARDUINO
Table 9.
Figure 13. ARDUINO
NUCLEO-WL33CCx
®
Power (CN5)
®
Uno V3 connector. It is built around four standard
®
shield when it is plugged into NUCLEO-WL33CCx with the pinout.
®
naming. To see the correspondence with the
®
Uno connectors and shield location
UM3418
Hardware layout and configuration
®
can fit with the Nucleo kits to offer
®
ARDUINO Digital 8-15 (CN6)
®
ARDUINO Digital 0-7 (CN8)
page 21/39