Advertisement
User Manual BACnet slave/ PROFINET
Document code: MN67679_ENG
Revision 1.011
Page 14 of 31
Industrial Electronic Devices
ETHERNET:
The BACnet/IP connection (HD67679-IP-A1), PROFINET connection and the updating of the Converter must be made using Connector3
and/or Connector4 of HD67679-A1 with at least a Category 5E cable. The maximum length of the cable should not exceed 100m. The cable
has to conform to the T568 norms relative to connections in cat.5 up to 100 Mbps. To connect the device to an Hub/Switch is recommended
the use of a straight cable, to connect the device to a PC/PLC/other is recommended the use of a cross cable.
ADFweb.com S.r.l.
Advertisement
Need help?
Do you have a question about the HD67679-IP-A1 and is the answer not in the manual?
Questions and answers