Watching Dvd Video - Sharp Actius PC-MP30 Operation Manual

Writing to CD-R and CD-RW
You can use CD-R or CD-RW to write data on. CD-RW is an erasable disc onto
which you can write data and from which you can erase data. CD-R is non-erasable
disc onto which you can write data only once. If free space remains, you can add data
until the disc is full.
To write data, use the preinstalled application, Drag'n Drop CD+DVD.
1
To run the Drag'n Drop CD+DVD, click start – All Programs – Drag'n Drop
CD+DVD4 – Drag'n Drop CD+DVD4. (Refer to the online help of the Drag'n Drop
CD+DVD for more information.)
• See the online help of the Drag'n Drop CD+DVD for details and other
features.
• You can also write data with the Windows CD writing software on the
computer. Refer to the Windows Help and Support for more information.

Watching DVD Video

You can watch DVD videos using the application called WinDVD. See online help of
WinDVD for more details.
To run the application, click start – All Programs – InterVideo WinDVD - InterVideo
WinDVD, or just insert a DVD video into the optical drive.
• Before watching DVD videos, follow the instructions below:
• Connect the AC adapter. If the battery is discharged, the operation
• Close all unnecessary and the automatic start-up applications.
• Disable the screen saver. (Refer to the Changing Wallpaper and
• When playing a DVD video, you may experience a picture with an
irregular motion, or frame dropouts, depending on videos.
Make sure to remove the DVD video from the drive when you finish
watching it. If you turn off the computer with the disc left in the drive, the
drive may not be recognized when the computer is turned on again.
1-18
will stop.
Setting Screen Saver section later in this chapter.)