Why does the external monitor display nothing/why is the image on it
distorted?
•
Confirm the monitor is turned on.
•
Confirm the monitor is connected correctly.
•
Make sure the external monitor is selected as the output display by pressing
Fn+F5 (
).
•
If you use Fn+F5 (
Fn+F5 (
) again to return the previously selected display and use the Display
Properties dialog box to change it again.
•
Make sure the value of the Screen resolution field in the Settings tab of the Display
Properties is same as or lower than the resolution of the external monitor.
•
Make sure the external monitor is not near any electric devices having strong
magnetic fields such as a TV set or radio.
•
Do not share an outlet with a TV set or radio.
Why can't I change the display with the Fn+F5 ( ) keys?
•
When playing the animation or game, the Fn+F5 (
work. Close the currently running application.
•
When running DOS in the full screen mode, the Fn+F5 (
may not work.
•
Use Display Properties dialog box to change it.
•
When you select Extended Desktop mode, the Fn+F5 ( ) keys combination does
not work.
•
INSTANT PLAY is designed to operate in LCD only or simultaneous LCD and
CRT display modes.
T-4
) to change the display, the image may be distorted. Press
) keys combination may not
) keys combination