Table of Contents
Advertisement
Watching DVD Video
You can enjoy watching a DVD video on your computer using the application called
WinDVD. See online help of WinDVD for more details. To run the application, click
start – All Programs – InterVideo WinDVD4 - InterVideo WinDVD4.
• Before watching a DVD video, follow the instructions below:
• Connect the AC adapter. If the battery is discharged, the operation
will stop.
• Disable the power management. See Power Management of
Chapter 3.
• Close all of the unnecessary or the automatic start-up applications.
• Disable the screen saver. (Refer to Changing Wallpaper and Setting
Screen Saver section later in this chapter.)
• This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology must
be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is
prohibited.
(Apparatus Claims of U.S. Patent Nos. 4,631,603; 4,577,216;,
4,819,098 and 4,907,093 licensed for limited viewing uses only.)
Make sure to remove the DVD disc from the drive when you finish
watching it. If you turn off your computer with the disc left in the drive,
the drive may not be recognized when your computer is turned on again.
Changing Region Code
A DVD disc has a region code which prevents playback of the disc in certain regions.
The region code appears on the top of the disc.
When shipped from the factory, your optical drive is set to a region code applicable to
your area.
Your DVD drive region code can be changed. Code change is limited.
Once the limit is reached, it cannot be changed any more.
To confirm the limit, click Region tab of Setup dialog box and check
bottom line in the window. (Refer to Using Parental Control section on
the next page to open the Setup dialog box.)
Make sure to log on your computer as a member of the Computer
administrators group. Otherwise you cannot change the region code.
2
2-11
Advertisement
Table of Contents
