Low Battery Indication - Sharp Actius PC-MP30 Operation Manual

Sharp actius pc-mp30: operation manual
Table of Contents

Advertisement

On INSTANT PLAY
Press the B key to display a numeric indication of the remaining amount of the battery
power. To hide it, press the B key again.
• The remaining operating time depends on the amount of the power the
computer is consuming. If you are using the audio system, PC card
slot, hard disk drive, or peripheral devices with the computer, it may
consume more battery power.
• The Power Meter may not indicate correctly for a short period after
resuming from standby or hibernation mode.
• If the actual remaining power in your battery is less than what the
Power Meter indicates, you should condition the battery pack as per
the procedure on the Conditioning Battery Pack section in this chapter.

Low Battery Indication

On Windows, you can set the battery level for sounding an alarm and letting the
computer go on System standby, System hibernate or shut down.
When the battery power level becomes significantly low, the battery
indicator (
and turn off the computer, or connect the AC power source immediately.
Otherwise, the computer will be shut down and the unsaved data may be
lost.
Battery Indicator
1.
In the Power Options Properties dialog box, select the Alarms tab.
) blinks red and the warning beep sounds. Save your data
2
2-3

Advertisement

Table of Contents
loading

Table of Contents