Table of Contents
Advertisement
Entering and Exiting Setup Utility
1.
Turn on the computer.
2.
When Press F2 for System Utilities appears, press F2.
3.
Change to the desired settings. Refer to the next section.
4.
Select Exit.
5.
Select one of the exit methods, and press Enter.
6.
Confirm the message and press Enter again. The system restarts.
When the Setup Utility is opened, power management does not work. Do
not close the display cover.
Changing Setting of Setup Utility
Mouse is disabled in the Setup Utility. Use the keyboard.
5
To change the settings:
1.
Use → or ← key to select the menu.
2.
Use ↑ or ↓ key to select the item.
Minus or Space key: Changes the value.
In the item with ►mark, press Enter to open a sub menu. Press Esc to close the
cub menu and return to the previous menu.
For date and time, press Enter on the item to select the value to be changed;
then, use minus key or space bar to change the value.
3.
Close the Setup Utility according to the steps above.
5-2
Advertisement
Table of Contents
