Connecting To A Tv Which Has No Audio And Video Input Jacks; Playback - Samsung VP-D651 Owner's Instruction Book

ENGLISH

Playback

Connecting to a TV which has no Audio and Video Input Jacks

✤
You can connect your Camcorder to a TV through a VCR.
1. Connect the Camcorder to your VCR with the Multi-AV cable.
I The yellow jack: Video
The white jack: Audio(L) - Mono
I
I The red jack: Audio(R)
2. Connect a TV to the VCR.
3. Set the Power switch to PLAY.
4. Set the Mode switch to TAPE. (VP-D653(i)/D655(i) only)
5. Turn on both the TV and VCR.
I Set the input selector on the VCR to Line.
Select the channel reserved for your VCR on the TV set.
I
6. Play the tape.
Playback
✤
You can play the recorded tape in Player mode.
1. Connect a power source and set the Power switch to PLAY.
2. Set the Mode switch to TAPE. (VP-D653(i)/D655(i) only)
3. Insert the tape you wish to play back.
4. Using the / (REW/FF) buttons, find the first position you wish to play back.
5. Press the (PLAY/STILL) button.
I The images you recorded will appear on the TV after a few seconds.
If a tape reaches its end while being played back, the tape will be rewinded automatically.
I
[ Notes ]
I The playback mode (SP/LP) is determined by the mode in which the tape was recorded.
I If the VCR has an S-Video input terminal, you may use S-Video Connector for better quality.
I The S-Video Connector transmits video only. Connect Audio cables for sound.
I If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L).
70 70
Audio input(left)-White
Audio input(right)-Red
Video input-Yellow
S-Video input
VCR
TV
Audio/Video/
S-Video
Antenna
1
Camcorder