Lithium Battery Installation; Battery Installation For The Internal Clock; Battery Installation For The Remote Control - Samsung VP-D651 Owner's Instruction Book
Auto focus
Hide thumbs
Also See for VP-D651:
- Owner's instruction book (119 pages) ,
- Owner's instruction book (119 pages) ,
- Owner's instruction book (118 pages)
Table of Contents
Advertisement
Preparation
Lithium Battery Installation
Battery Installation for the Internal Clock
✤
The Lithium battery maintains the clock function and preset contents of the memory; even if the Battery pack or AC Power
adapter is removed.
✤
The Lithium battery for the Camcorder lasts about 6 months under normal operation from the time of installation.
✤
When the Lithium battery becomes weak or dead, the date/time indicator will display
00:00 1.JAN.2005 when you set the Date/Time to on.
When this occurs, replace the Lithium battery with CR2025 type.
1. Remove the Lithium-ion battery from the left side of the Camcorder.
2. Open the Lithium battery cover on the left side of the Camcorder.
3. Position the Lithium battery in the Lithium battery holder, with the positive (
terminal face up.
4. Close the Lithium battery cover.
Battery Installation for the Remote Control
✤
You need to insert or replace the Lithium battery when:
- You purchase the Camcorder.
- The remote control doesn't work.
✤
Position the Lithium battery in the Lithium battery holder, with the positive (
terminal face up.
✤
Be careful not to reverse the polarity of the battery.
[ Notes ]
I
The Lithium battery must be inserted in the correct direction.
I
Do not pick up the battery using tweezers or other metal tools.
- This will cause a short circuit.
I
Do not recharge, disassemble, heat or immerse the battery in water, to avoid the risk of explosion.
Warning: Keep the Lithium battery out of the reach of the children.
Should any battery be swallowed, consult a doctor immediately.
)
)
ENGLISH
19
19
Advertisement
Table of Contents
