Maintenance; After Finishing A Recording - Samsung VP-D651 Owner's Instruction Book
Auto focus
Hide thumbs
Also See for VP-D651:
- Owner's instruction book (119 pages) ,
- Owner's instruction book (119 pages) ,
- Owner's instruction book (118 pages)
Table of Contents
Advertisement
ENGLISH
Maintenance
After Finishing a Recording
✤
At the end of a recording you must remove the power source.
✤
When recording with a Lithium ion Battery pack, leaving the pack on the Camcorder can reduce
the life span of the battery. The Battery pack should be released after recording is completed.
1. Slide the TAPE EJECT switch in the direction of the arrow and open the cassette door
until it clicks.
I
Opening the cassette door ejects the tape automatically.
I
Please wait until the tape is completely ejected.
2. After removing the tape, close the door and store the Camcorder in a dust free environment.
Dust and other foreign materials can cause square-shaped noise or unstable images.
3. Set the Power switch to the OFF.
4. Disconnect the power source or remove the Lithium ion Battery pack.
Press the BATTERY RELEASE button located on the left side of the Camcorder while pushing
the Battery pack in the direction of the arrow.
110
110
1
2
3
4
Advertisement
Table of Contents
