Sequence Setting; Preset - Samsung SCP-3120 User Manual

Functional Description

Sequence Setting

10. Preset

10.1 Preset Location Saving
▶ Main Menu/Sequence Setting/Preset/Setting
This function enables the memorization of a selected location
Main Menu
and activates the Pan, Tilt, and Zoom functions at that location.
Camera Setting
Saved locations can be recalled using the Preset Execute
Sequence Setting
command.
P/T Setting
OSD Setting Setting Up Preset Numbers :
Alarm Setting
Selecting the Preset Setting menu brings up a screen as
Initialize
shown below. Move the joystick in all four directions to
Password Setting
select the desired number. (Only SCC-3100A, SCC-1000)
Status
➡
Sequence Setting
Preset
Swing SEQ
Saving Preset Locations :
Group SEQ
Selecting a preset number and pressing the Enter key
Tour SEQ
redirects the menu to the screen shown below.
PTZ Trace
Using the joystick, adjust the location of the Pan and Tilt
Auto Run
functions and then set the Zoom and Focus command.
Power On Resume ON
In Preset Settings, the Zoom and Focus command is
➡
controllable only by the Zoom command. To switch
between Zoom and Focus, use the Preset 1 and 2
Preset
commands as shown below.
Setting
Edit
Home Position OFF
Execute
Clear
Status
58
SPEED DOME CAMERA
Preset Setting
Preset = 001 (255)
Preset Setting
1+PST:ZOOM 2+PST:FOCUS
Use W/T Preset
User Guide
10.2 Preset Edit
Main Menu/Sequence Setting/Preset/Edit
▶
You can edit the 13 preset items such as Pan/Tilt location,
Main Menu
Zoom and Focus, which are selected among camera functions.
Camera Setting
PTZ :
Sequence Setting
Recalls saved locations using the Preset Settings command.
....
➡
Focus Mode :
Refer to the section entitled Setting Up Your Camera.
Sequence Setting
Brightness :
Preset
Refer to the section entitled Setting Up Your Camera.
Swing SEQ
Group SEQ
Iris :
....
Refer to the section entitled Setting Up Your Camera.
➡
Backlight :
Preset
Refer to the section entitled Setting Up Your Camera.
Setting
Day/Night :
Edit
Refer to the section entitled Setting Up Your Camera.
Home Position OFF
Motion Det.
Execute
Refer to the '10.3 Motion Detection'.
Clear
Scene Adj :
Status
Enables setting the Shutter, AGC, DNR, XDR, Sens-Up,
➡
White Balance, Stabilizer and for more information about
Preset Edit
interface terminology, please refer to the section entitled
Setting Up Your Camera.
Preset = 001* (1~255)
➡
Preset Edit [001]
PTZ 000/-05/X1
Focus ONESHOT
Brightness 32
Iris AUTO
Back Light OFF
Day/Night AUTO
Motion Det.
Scene Adj.
SPEED DOME CAMERA
59
User Guide